Telephone User Manual

78 Camera

Camera Options

There are several settings associated with the full-color digital camera. These

settings allow you to customize how the camera operates when taking pictures.

To set a camera option:

1. Start the camera. For more information, see "Taking Pictures" on page

77.

2. Press the right softkey for Options.

3. Select from the following options:

• (1) Self Timer: Allows you to configure a timer for Off, 5 Sec. or 10

Sec.

• (2) Fun Tools: Allows you to select:

Fun Frames: Allows you to select a frame to be placed around the

image before the picture is taken. Press the navigation key left or

right to select the desired frame. Press to select it and return to

the camera mode.

Color Tones: Allows you to select between several different color

tones including None, Monochrome (black & white), Negative,

Sepia, Green, and Aqua by pressing the navigation key left or right.

When you find the desired tone, press .

• (3) Controls: Allows you to set the Brightness, White Balance, and

Night Shot, and Metering for your pictures.

Brightness: Allows you to set the brightness level. Press the

navigation key left or right to increase or decrease the desired

brightness.

White Balance: Allows you to set up the white balance of the

camera automatically or manually using the different preset modes.

The modes available are:

• Auto: Automatically adjusts the lighting.

• Sunny: Decreases the light sensitivity for taking pictures in full

or mostly sunny conditions.

• Cloudy: Increases light sensitivity for taking pictures under

cloudy conditions.

• Tungsten: Adjusts the white balance to match the inside

lighting conditions displayed using common household light

bulbs.

u440 BMC Guide.book Page 78 Wednesday, October 8, 2008 10:17 AM