Owner Manual

Troubleshooting
English56
Troubleshooting
Code Meaning
LC
Check the drain hose.
• Make sure the end of the drain hose is positioned correctly.
• Make sure the drain hose is not clogged.
• Turn off the washer, unplug it, wait one minute, and then plug
the washer in again. If the information code remains, contact a
Samsung customer service center.
NOTE
When the washer displays “LC”, the washer drains for 3 minutes.
During this time, the Power button is inoperative.
OC
Water overowed.
• Restart after spinning.
• Turn off the washer, unplug it, wait one minute, and then plug
the washer in again. If the information code remains, contact a
Samsung customer service center.
PC
When position of the clutch can't be detected.
• Turn off the washer, unplug it, wait one minute, and then plug
the washer in again. If the information code remains, contact a
Samsung customer service center.
PC1
After position of the clutch is detected, if the signal from the clutch
hall is incorrect.
• Turn off the washer, unplug it, wait one minute, and then plug
the washer in again. If the information code remains, contact a
Samsung customer service center.
Ub
Spinning does not work.
• Make sure laundry is spread out evenly.
• Make sure the washing machine is on a at, stable surface.
• Redistribute the load. If only one item of clothing needs washing,
such as a bathrobe or pair of jeans, the nal spin result might be
unsatisfactory, and a “Ub” check message will appear in the display.
Ur
Display for additional rinsing.
• Appears when additional rinsing cycle senses that tub is
unbalanced.
• Press any button/key to release the display.
Untitled-1 56 6/20/2019 2:25:00 PM