User's Manual

16_ Operating basic function
Operating basic function
SPACE HEATING OPERATION
In this mode, heating will be activated as required by the water temperature set point.
• The set point can be set manually
• or set weather dependant
1. Press Power(Space mode) button to turn on the heat
pump unit.
The heat pump will be turned on in the mode you select.
• Space water heating devices: Radiator or Fan coil unit
(field supply)
In winter season, the heat pump sometimes goes
into defrost mode to prevent from the freezing of the
outdoor heat exchanger.
The heat pump has a built-in protection mechanism
to prevent the unit from being damaged when it is
started immediately after being plugged in or stopped,
the heat pump will start up after 3 minutes.
2. Press the Mode(Space mode) button once to select the space heating mode.
The heat pump will run on heating mode.
3. Press Up or Down button to set the desired temperature.
The temperature can be set between 15ºC to 55ºC.
The temperature is adjusted by 0.5ºC.
CAUTION