Side-By-Side Refrigerator User Manual

setting up _17
setting up your side-by-side
refrigerator
MAKING MINOR ADJUSTMENTS TO THE DOORS
Remember, a leveling refrigerator is necessary for getting the doors perfectly even. If you need help,
review the previous section on leveling the refrigerator.
When the door of the freezer is lower
than the fridge
When the door of the freezer is higher
than the fridge
In both cases the process to correct the imbalance is the same. Open the doors and adjust
them, one at a time, as follows:
1. Unscrew the nut
1
from the lower hinge until it reaches the upper end of the bolt
2
.
When you release the nut
1
, make sure that you use the Allen wrench provided
3
to
loosen the bolt
2
in a counter-clockwise direction. You should then be able to unscrew the
nut
1
with your fingers.
2. Adjust the height difference between the doors by turning the bolt
2
clockwise or
counter clockwise .
When you turn clockwise , the door will move up.
Adjustment part
Adjustment part
3
2
1
Wrench
Bolt
Nut
3
2
Wrench
Bolt
01 SETTING UP
DA99-01507A(HM-134a)-EN(0.0).ind17 17 2007.4.21 9:59:53 AM