Operation Manual

Installation

English38

Installation

5. Remove the hinges (C) on both sides.

6. Gently lift up the doors one by one to

remove. Use caution as the door may

fall off or over.

Reconnect the water hoses

Once the refrigerator has passed through the entrance, reconnect the water hoses and

insert the provided clips (x2) to tighten the coupler.

A. Center of transparent coupler

B. Clip A (1/4”) (6.35 mm)

CAUTION

• Make sure the water hoses are

connected with matching colours.

• To prevent water leaks, each water

hose must be inserted fully to the

centre of the transparent coupler and

then must be clipped.

Untitled-30 38 7/17/2017 5:04:03 PM