Use and Care Guide

English - 15
01 SETTING UP
MAKING MINOR ADJUSTMENTS
TO THE DOORS
Remember, a level refrigerator is necessary for
getting the doors perfectly even.
If you need help, review the previous section on
levelling the refrigerator.
Adjustment part
When the door of the freezer is higher than
the fridge
Open the doors and adjust them, one at a time, as
follows:
1. Unscrew the nut (1) from the lower hinge until
it reaches the upper end of the bolt (2).
(1) Nut
(2) Bolt
(3) Wrench
When you release the nut (1), make sure
that you use the hex wrench provided (3)
to loosen the bolt 2 in a counter-clockwise
( ) direction.
You should then be able to unscrew the
nut (1) with your fingers.
2. Adjust the height difference between the doors
by turning the bolt (2) clockwise ( ) or
counter clockwise ( ).
(2) Bolt
(3) Wrench
When you turn clockwise ( ), the
door will move up.
3. After adjusting the doors, turn the nut (1)
clockwise ( ) until it reaches the lower
end of the bolt, then tighten the bolt again with
the wrench (3) to fix the nut in place (1).
(2) Bolt
(3) Wrench
(1) Nut
If you do not secure the nut firmly, the bolt
may release.
DA68-02981B-00.indb 15 2013. 12. 12. �� 4:04