Use and Care Manual

English - 19
02 OPERATING
USING THE CONTROL PANEL
Freezer/Fridge
(Temperature adjustment)
Press the Freezer or Fridge button until the desired
temperature is set.
For a lower temperature, press the Freezer or
Fridge button until more LEDs light (colder).
For a higher temperature, press the Freezer or
Fridge button until fewer LEDs light (less cold).
Each time you press the Freezer or Fridge button,
the temperature indicator changes in the order
shown below.
Power Freeze
This icon lights when you activate the Power
Freeze function.
Power Freeze function generates cool air for
50 hours continuously, chilling the freezer more
quickly.
This function is useful when you need to decrease
the temperature in the freezer quickly or to make
more ice rapidly.
When the freezer is cold enough or you have
enough ice, just press and hold the Freeze button
again for 3 seconds to cancel the Power Freeze
function.
When you use this function, the energy
consumption of the refrigerator may
increase.
Remember to turn it off when you do
not need it and return the freezer to your
original temperature setting.
Energy Saver
This icon lights when you activate the Energy
Saver function.
The Energy Saver function is automatically set to
“ON” when power is supplied to the Refrigerator.
If condensation occurs on the doors, turn the
Energy Saver function off.
Lighting
This icon lights when you activate the Lighting
function. When the icon is lit, the dispenser light
(under the display) is on continuously.
If you would like the dispenser light to come on
only when someone uses the dispenser, press the
Lighting button to turn the continuous mode off.
Control Lock
This icon lights when you activate the Lock
function. When the Control Lock icon is lit, all the
panel buttons, including the Ice button and the
dispensers, are locked and de-activated. Press
and hold the Lighting/Control Lock button for 3
seconds to turn Control Lock off and re-activate
the panel buttons.
Filter Indicator
This icon turns red when you need to change the
filter, usually after the refrigerator has dispensed
about 300 gallons of water (or after about 6
months).
The filter Indicator will be Off when you initially
insert the water filter.
Power Cool
This icon lights when you activate the Power Cool
function.
Power Cool function is great for a quick fridge cool
down.
If you activate the Power Cool function, the inside
temperature of the Fridge decreases for about two
and a half hours.
When you want to turn Power Cool off, press and
hold the Fridge/Power Cool (3 sec) button again
for 3 seconds.
DA68-02981E-01.indb 19 14. 1. 20. �� 7:48