User Manual

Allow an adequate space and install the fridge/freezer on a firm, level floor.
• If the appliance is not level, there may be unusual noises and poor cooling.
• Wait for at least one hour before plugging the appliance in.
Clean the fridge/freezer.
• Wipe and clean the appliance inside and outside with a damp cloth.
Plug the fridge/freezer into a wall socket used exclusively by this appliance.
• This appliance must be properly grounded.
Use of an grounded socket exclusively for the
appliance:
• If you are using a socket with an earthing terminal, you
do not require a separate earthing connection.
Use of a non-grounded socket:
• Connect the “earthing wire” to the copper plate and bury
it at a depth of at least 25 cm in the ground.
If the front of the appliance is slightly higher than the rear, the door can be open and closed more easily.
Place the food in the fridge/freezer.
• It is recommended that you wait for the appliance to cool for 2-3 hours before storing food in it.
INSTALLING THE FRIDGE/FREEZER
4
Warning
LEVELLING
25cm
The appliance tilts down to the left.
Turn the left adjusting leg in the direction of the arrow with
a flat head screwdriver until the appliance is level.
The appliance tilts down to the right.
Turn the right adjusting leg in the direction of the arrow
with a flat head screwdriver until the appliance is level.
DA68-01281E-0.1 5/22/05 1:20 PM Page 4