Operation Manual

5
Allow an adequate space and install the fridge/freezer on a firm, level floor.
• If the appliance is not level, there may be unusual noises and poor cooling.
• Wait for at least one hour before plugging the appliance in.
Clean the fridge/freezer.
• Wipe and clean the appliance inside and outside with a damp cloth.
Plug the fridge/freezer into a wall socket used exclusively by this appliance.
• This appliance must be properly grounded.
If the front of the appliance is slightly higher than the rear, the door can be closed more easily.
Place the food in the fridge/freezer.
• It is recommended that you wait for the appliance to cool for 2-3 hours before storing
food in it.
INSTALLING THE FRIDGE/FREEZER
LEVELLING
The appliance tilts down to the left.
Turn the left adjusting leg in the
direction of the arrow with a flat head
screwdriver until the appliance is level.
950mm
595mm
1050mm
600mm
at least
50mm
Allow the enough space for
opening drawers.
Drawers can be easily opened with
this condition.
depth with doors opened
at least
50mm
The appliance tilts down to the right.
Turn the right adjusting leg in the
direction of the arrow with a flat head
screwdriver until the appliance is level.
at least
50mm
DA99-01220G-EN (CORE)-0.7.indd 5 2008.5.21 7:41:28 PM