Refrigerator Owner's Manual
REMOVING AND CLEANING A C C E S S O R I E S
10
Ice cube tray
• Place a hand in the lower groove, then pull the ice cube maker forward.
• Remove the ice cube trays and rinse them in water and dry completely.
Humidity controlled drawers
• Pull the high-humidity salad drawer out as far as it will go, then remove it by
lifting it slightly and pulling it towards you.
• Wipe it with a damp cloth and dry completely.
Door bins
• Hold the door bin in both hands, then remove it by lifting it slightly and pulling
it towards you.
• Wash it in water and dry completely.
Freezer drawers
• Holding the freezer drawer in both hands, pull it out as far as it will
go, then remove it by lifting it up slightly and pulling it towards you.
• Wipe it with a damp cloth and dry completely.
Transparent, unbreakable shelves
• Remove the shelf, then clean it using water and detergent and dry
c o m p l e t e l y.
• When replacing the shelves, do not mix up the top, middle and
bottom shelves.
Rubber seal
• Clean the rubber seals with a damp cloth and detergent. Use a wooden
skewer wrapped in a small cloth to clean in the grooves.
Before cleaning the appliance, you must always switch it off and unplug it from the wall socket.
Do not use a steam cleaner. Hot steam could damage the surface of the appliance or the electrical
components, with a risk of electric shock.