Quick Guide

English 3
Before you begin
Before you begin
About this manual
READ THESE INSTRUCTIONS COMPLETELY AND CAREFULLY.
Important note to the installer
• Read all instructions contained in these installation instructions before installing
the range.
• Remove all packing materials from the oven compartments before connecting the
electric and gas supply to the range.
• Observe all governing codes and ordinances.
• Be sure to leave these instructions with the consumer.
• Installation of this appliance requires basic mechanical skills.
• Proper installation is the responsibility of the installer.
• Product failure due to improper installation is not covered under the Warranty.
Important note to the consumer
Keep these instructions with your user manual for future reference.
• As when using any appliance generating heat, there are certain safety
precautions you should follow.
• Be sure your range is installed and grounded properly by a qualied installer or
service technician.
• Make sure the wall coverings around the range can withstand the heat generated
by the range.
• Cabinet storage space above the surface burners should be a minimum of 30 in
(76.2 cm).
Important note to the servicer
The electrical diagram is in an envelope attached to the back of the range.
Contents
Before you begin 3
Important safety information 4
Gas range components 11
What’s in the box 11
Installation requirements 13
Location requirements 13
To avoid breakage 15
Gas requirements 16
Special gas requirements (gas models sold in massachusetts) 17
Electrical requirements 17
Installation instructions 19
Installing your gas range 19
Step 1. Unpack the range 19
Step 2. Connect the range to gas supply 19
Step 3. Convert to lp gas (optional) 20
Step 4. Install the anti-tip device 21
Step 5. Plug in and place 21
Step 6. Level the range 22
Step 7. Assemble the surface burners 22
Step 8. Check the ignition of surface burners 23
Step 9. Final installation checklist 24
Adjusting the oven burner air adjustment shutters 24