User Manual
Table Of Contents
- Important safety information
- Read all instructions before using this appliance
- Symbols used in this manual
- California Proposition 65 Warning
- Commonwealth of Massachusetts
- General safety
- Fire safety
- Gas safety
- Electrical and grounding safety
- Installation safety
- Location safety
- Cooktop safety
- Oven safety
- Storage drawer safety
- Self-cleaning oven safety
- Overview
- Before you start
- Cooktop
- Gas oven
- Maintenance
- Troubleshooting
- Warranty (U.S.A)
- Warranty (CANADA)
40 English
Maintenance
Maintenance
Round Burner head
1. Orient the burner head so that the
opening for the electrode lines up with
the electrode.
2. Install the burner head so that the
electrode passes through the opening for
the electrode. Make sure the burner head
lies at on the stove top.
Oval burner
1. Orient the burner head so that the
opening for the electrode lines up with
the electrode.
2. Install the burner head so that the
electrode passes through the opening for
the electrode. Make sure the burner head
lies at on the stove top.
Burner Cap
Match the burner caps to the burners by
size, and then reinstall the caps on the
burner heads.
CAUTION
Make sure each cap is reinstalled on the
correct burner head, is centered on the
burner head, and lies at.
Burner Head
Burner cap
CAUTION
Make sure all burner components (heads
and caps) are reinstalled properly. They
will be stable and rest at when correctly
installed.