User Manual

English 39
Maintenance
Reinstallation
Oven door
To remove the oven door
1. Turn off the oven.
2. Fully open the oven door.
3. Pull the hinge locks away from the
oven body and down toward the door
frame into the unlocked position.
1
2
4. Close the door to 5 degrees from
vertical. This is the removal position.
5. While holding both sides of the oven
door tightly, lift it up and out until the
hinge arms come clear of the slots at
the bottom of the oven door.
6. Place the door in a safe location.
WARNING
• The door is very heavy. Be careful when removing and lifting the door. Do not
lift the door by the handle.
• Take care when moving the oven door. Improper handling could result in
physical injury.
• To prevent electric shock, make sure the oven is turned off before removing
the oven door.
Replacement
Oven light
The oven light is a standard 40-watt appliance bulb. It comes on when you open
the oven door.
1. Turn off the oven.
2. Make sure the oven and oven light are
cool.
3. Open the door, and remove the glass
cover by turning it counterclockwise.
4. Remove the oven light from the socket
by turning it counterclockwise.
5. Insert a new 40-watt appliance bulb
into the socket, and then turn it
clockwise to tighten.
6. Reinsert the glass cover, and then turn
it clockwise to tighten.
CAUTION
To prevent electric shock, make sure the gas oven is turned off and cool before
replacing the oven light.
NOTE
• The oven light does not operate during the self-cleaning cycle.
• Remove the racks if they prevent you from accessing the oven light.
NX58J7750S_AA_AC_DG68-00623A-07_EN+CFR.indb 39 2018-08-30  12:22:07