User Manual
Table Of Contents
- User's Guide
- Notices
- Important Safety Information
- Regulatory Compliance Statements
- Using Your Documentation
- Getting Started
- Introducing Windows
- Using the Computer
- Connecting to the Internet
- Customizing Your Computer
- System Management
- Troubleshooting
- Specifications
- Abbreviations
- Glossary
- Using Windows 2000
- User's Guide (Hong Kong Only)
- Chapter 1 Getting Started
- Chapter 2 Introducing Windows
- Chapter 3 Using The Computer
- Chapter 4 Connecting to the Internet
- Chapter 5 System Management
- Chapter 6 Customizing your computer
- Chapter 7 Recovering the Computer
- Appendix
28 Users Manual
Step 1. Connect 5.1 channel speaker system to your computer
1. Connect an amplifier to the S/PDIF port on your computer.
2. Connect speakers to the amplifier. (Refer to the speaker system’s manual.)
3. To watch through a TV, connect the TV, and change the display device to the TV
in the Display Properties. (Refer to ”Using External Display Devices” (p 68).)
Step 2. Configuring the digital sound output on the computer
Press <Fn>+<F7 / S/PDIF> to output the audio signal through the S/PDIF port. If you
press these keys again, the output sound signal is cancelled.
The S/PDIF setting also can be changed in the Sound and Audio Device
properties. (Click Start > Control Panel > Sounds, Speech, and Audio
Devices > Sounds and Audio Devices.) However, <Fn>+<F7/ S/PDIF> keys
have priority.
Front Left Speaker
TV
Surround Left Speaker Surround Right Speaker
Center
Speaker
Front Right Speaker
Digital Amplifier
Computer
Sub
Woofer