Laptop User Guide

36
37
Chapter 2.
Using the computer
Touchpad
The touchpad provides the same function as a mouse and the left
and right buttons of the touchpad plays the role of the left and
right buttons of a mouse.
To use the touchpad, the touchpad driver is required.
A built-in Windows driver and a driver provided by the
manufacturer are provided. For a better performance, using the
driver provided by the touchpad manufacturer is recommended.
The driver provided by the touchpad manufacturer is already
installed in this product by default when you purchase this
product. When you reinstall Windows or change the operating
system, using the driver provided by the corresponding
manufacturer is recommended.
Touch the touchpad with your  ngers only.
Anything other than your  ngers, such as a ball-point pen,
will not be recognized by the touchpad.
If you touch the Touchpad or press the Touchpad buttons
while booting up, the Windows boot time may be
extended.
Checking the touchpad manufacturer Click the Start
> Control Panel > Hardware and Sound > Mouse >
Hardware tab and check the device (E.g. Elan, Synaptics,
etc. ).
The Windows driver provides basic touchpad functions
(moving the pointer, clicking, etc.) but the gesture function
is not supported.
Basic Touchpad Functions
Moving the cursor on the screen
Place your  nger on the touchpad slightly and move your  nger.
The mouse cursor will move accordingly. Move your  nger in the
direction you wish to move the cursor.