Installation Guide

32 English

Operating the oven

Extra features

Thermostat adjustment

The temperature in the oven has been preset at the factory. When rst using the

oven, be sure to follow recipe times and temperatures. If you think the oven is

too hot or too cool, the temperature in the oven can be adjusted. Before adjusting,

test a recipe by using a temperature setting that is higher or lower than the

recommended temperature. The baking results should help you to decide how

much of an adjustment is needed.

The oven temperature can be adjusted ±35 °F (±19 °C).

How to adjust the oven temperature

1. Press Broil and 1 at the same time for 3 seconds.

The display will show 0.

2. Enter the adjustment you want, eg. 20 °F, using the number pad.

You can adjust the temperature so that it is lower than the factory setting by

pressing Broil.

3. Press START/SET.

NOTE

This adjustment will not affect the broiling or the self-cleaning temperatures. The

adjustment will be retained in memory after a power failure.

Convection auto conversion feature

When you use the auto conversion feature, the convection auto conversion feature

will automatically convert entered regular baking temperatures to convection

baking temperatures.

If this feature is activated, the display will show the actual converted (reduced)

temperature. For example, if you enter a regular recipe temperature of 350 °F and

press START/SET, the display will show the converted temperature of 325 °F.

How to disable or enable the auto conversion feature

1. Press Broil and 3 at the same time for 3 seconds.

The display will show On (enabled) or OFF (disabled).

The default setting is Con OFF.

2. Press 0 to select Con On or Con OFF.

Pressing 0 changes the mode between Con On and Con OFF.

3. Press START/SET.

NE59M4320_DG68-00882A-00_EN.indd 32 12/7/2016 4:42:20 PM