Product manual

02 Getting Started
Attaching the Toroidal Ferrite Core to the Cord of the Speaker cable
Attaching the Toroidal ferrite core to the cord of the Speaker
cable helps prevent RF interference from radio signals.
1.
Pull the fixing tab of the Toroidal ferrite core to open it.
2.
Make one loops around the core with the cable of the
Speaker cable.
3.
Attach the Toroidal ferrite core to the Speaker cable cord as
the figure shows,and then press it until it clicks.
LOOPING THE CABLE AROUND THE TOROIDAL CORE
Lift up to release the lock and open the core.
Make one loops around the core with the cable.
(Start winding 2 to 4 inches [5-10 cm]
away from the core).
Close the lock.
11 English
02793J-MX-JS5000-ZP-ENG-20150205.indd 11 2015/3/20 11:23:27