Security Camera User Manual

26 – 10X MINI SMART DOME CAMERA
How to use OSD Menu
PRIVACY ZONE MASK SETUP
PRIVACY ZONE
MASK NO. 1
UNDEFINED
DISPLAY OFF
CLEAR MASK CANCEL
<EDIT MASK>
BACK
EXIT
Select area in image to mask.
MASK NO. [1~4]
Select Mask number. If the selected mask has
already data, camera moves as it was set.
Otherwise, “UNDEFINED” will be displayed under
“Mask NO”.
DISPLAY [ON/OFF]
Sets if camera makes mask shows or not on images.
CLEAR MASK [CANCEL/OK]
Deletes data in the selected MASK NO.
Privacy Zone Area Setup
EDIT MASK 1
MOVE TO TARGET POSITION
[NEAR:SELECT/FAR:CANCEL]
0/0/x1/N
Move camera to area to mask. Then the menu to adjust
mask size will be displayed.
•
•
•
❖
Privacy Zone Size Adjustment
EDIT MASK 1
[
:ADJUST MASK WIDTH]
[
:ADJUST MASK HEIGHT]
[NEAR:SELECT/ FAR:CANCEL]
Adjust mask size. Use joystick or arrow buttons to
adjust mask size.
 (Left/Right) Adjusts mask width.
 (Up/Down) Adjusts mask height.
 It is noted that during PAN/TILT control like jog
action, the object behind the privacy mask can be
disclosed in a short period of time.
 To hide a certain zone completely regardless of high
speed PT motions, it is recommended that the size
of mask must be 20% bigger than original target size
MOTION SETUP
MOTION SETUP
PRESET LOCK ON
PWR UP ACTION ON
AUTO FLIP ON
JOG MAX SPEED 140/SEC
JOG DIRECTION NORMAL
FRZ IN PRESET OFF
<PARKING ACTION SETUP>
<ALARM INPUT SETUP>
BACK
EXIT
Setup the general functions of Pan/Tilt motions.
PRESET LOCK [ON/OFF]
This function is made to protect preset data from
unauthorized overwriting. If Preset Lock is ON, it is
impossible to create and delete Preset, Auto Pan,
Pattern and Scan. It is only possible to run those
functions. To create and delete those functions, use
OSD menu.
POWER UP ACTION [ON/OFF]
Refer to “Other Functions” section.
❖
•
•
•
•
❖