Installation Manual
7
ENGLISH
3. Ƹϑʪϩиͱͱθͱθʪϑʀθʪиϑϩͱѣуϩ˵ʪɵɇʀʀͱЭʪθϩͱϩ˵ʪиɇࢋAͱʪʀϩϩ˵ʪΧͱиʪθʀɇɵʪϑ࣍ǤߢࡡǤߣ࣎ɇʒ
communication cables (F1, F2) to the terminals on the back of the front cover with adjusting to a suitable
length.
4. Ǯ˵ʪʀͱʪʀϩ˝ϩ˵ʪΧͱиʪθʀɇɵʪϑϩͱǤߢɇʒǤߣࡡ˙ɇϑϩʪϩ˵ʪťA9ϩʪθɇϑʀθʪиϑ࣍AĘߦ࣎ϩͱɇϩͱθαЇʪͱ˙ߧ
Ęࡔʀͱθʪϑϑࢋ
Ɗʀθʪиϑіʪࡠđߤуߧ
• You can connect up to 16 indoor units to a Wi-Fi Kit.
ߣ Ǥߣ Ǥߤߤ ߥ ߦ
庢
庥度
ⓐ
庤
庣
10 and
over
10 and over
50 and over
10 and over
Screw
holes
࢘
Be sure to secure space of at least
10 mm (up/right/left) and 50 mm
(down) around the back cover
ɵʪ˙ͱθʪѣу˝ϩ˵ʪɵɇʀʀͱЭʪθͱ
the wall.
࢘
Fix the screws to the
screw holes.
࢘
Do not over-tighten the PCB
terminal.
ǤߢǤߣߢߣ
Wi-Fi Kit
PCB port
Indoor unit
Unit: mm
Back over
Item Contents Item Contents
庡
Power/communication terminals
庤
LED
庢
Tracking/Reset button
庥
Ęʪϩиͱθť9
庣
Micro SD card slot
度
Repeater PBA
5. Assemble the Wi-Fi kit again.
• Ãϑʪθϩϩ˵ʪ˙θͱϩʀͱЭʪθϩͱϩ˵ʪЇΧΧʪθ˝θͱͱЭʪϑɇϑϑ˵ͱиϩ˵ʪѣ˝Їθʪࢋ˙ϩʪθɇϑϑʪɵцࡡɇʪ
sure that there is no gap between the covers.
NOTE
NOTE
zvsGvjmG~TmGrp{G㡔⤱䛙Gpiptluki]_TWWWWWhTWWUGGG^ YWX`TWZTY\GGG㝘䟸GZaX\a\[