Manual

Overview
|
Installation
|
OSD Mode
|
Uninstall
|
Troubleshooting
Troubleshooting
MagicTune may not work in case monitor is replaced or driver of graphic card is updated
while MagicTune is operating. If so, please restart the system.
Check when MagicTune does not function properly.
* MagicTune feature is found only on PC (VGA) with Window OS that supports Plug and
Play.
* MagicTune function is not available when BNC is used for a signal input.
Use D-sub to activate MagicTune function. (BNC is optional - 19" Model Only)
Visit the MagicTune
website
for technical support for MagicTune, FAQs (questions and
answers) and software upgrades.
* To check whether your PC is available for MagicTune feature, follow the
steps below (When Windows is XP);
Control Panel -> Performance and Maintenance -> System -> Hardware -> Device
Manager -> Monitors -> After deleting Plug and Play monitor, find 'Plug and Play
monitor' by searching new Hardware.