FULL MANUAL HW-B550 Imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Para evitar cualquier avería o daños, lea detalladamente este manual de instrucciones antes de conectar y utilizar este aparato. Conserve el manual para referencia futura.
SAFETY INFORMATION SAFETY WARNINGS WARNING •• To reduce the risk of fire or electric shock, do TO REDUCE THE RISK OF ELECTRIC SHOCK, DO not expose this appliance to rain or moisture. NOT REMOVE THE COVER (OR BACK). CAUTION NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Refer to the table below for an explanation of symbols which may be on your Samsung product. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. This symbol indicates that high voltage is present inside.
PRECAUTIONS 5. The battery used with this product contains chemicals that are harmful to the environment. Do not dispose of the battery 1. Ensure that the AC power supply in your in the general household trash. Do not house complies with the power expose the battery to excess heat, direct requirements listed on the identification sunlight, or fire. Do not short circuit, sticker located on the bottom of your product.
CONTENTS 01 Checking the Components 6 02 Product Overview 7 03 04 05 06 Front Panel / Top Panel of the Soundbar -------------------------- 7 Bottom Panel of the Soundbar -------------------------- 8 Using the Remote Control 9 Inserting Batteries before using the Remote Control (AAA batteries X 2) -------------------------- 9 How to Use the Remote Control -------------------------- 9 Using the Hidden Buttons (Buttons with more than one function) -------------------------- 13 Output s
07 Connecting an External Device 24 Method 1. Connecting using an HDMI Cable -------------------------- 24 Method 2.
01 CHECKING THE COMPONENTS SOUND MODE WOOFER CH LEVEL Soundbar Main Unit TONE CONTROL Subwoofer Remote Control / Batteries (Not available in some locations or models) AC/DC Adapter (Soundbar) HDMI Cable x2 Power Cord (Subwoofer, Soundbar) x2 Wall Mount Guide Holder-Screw x2 x2 (M4 x L10) Screw Bracket-Wall Mount •• For more information about the power supply and power consumption, refer to the label attached to the product.
02 PRODUCT OVERVIEW Front Panel / Top Panel of the Soundbar Top Panel Display Displays the product’s status and current mode. (Power) Button Turns the power on and off. •• Auto Power Down Function The unit turns off automatically in the following situations: –– In D.IN / HDMI / BT / USB Mode : If there is no audio signal for 20 minutes. (Volume) Button Adjusts the volume. •• When adjusted, the volume level appears on the Soundbar’s front display.
Bottom Panel of the Soundbar HDMI IN DIGITAL AUDIO IN (OPTICAL) DIGITAL AUDIO IN DIGITAL AUDIO IN DIGITAL AUDIO IN (OPTICAL) (OPTICAL) (OPTICAL) USB (5V 0.5A) HDMI IN HDMI IN HDMI IN HDMI IN HDMI IN HDMI IN USB (5V 0.5A) USB (5V 0.5A) USB (5V 0.5A) DIGITAL AUDIO IN (OPTICAL) DIGITAL AUDIO IN (OPTICAL) DIGITAL AUDIO IN USB (5V 0.5A) (OPTICAL) USB (5V 0.5A) HDMI IN TO TV HDMI (ARC) HDMI TO TV HDMI TO TV (ARC) (ARC) HDMI IN USB (5V 0.
03 USING THE REMOTE CONTROL Inserting Batteries before using the Remote Control (AAA batteries X 2) Slide the back cover in the direction of the arrow until it is completely removed. Insert 2 AAA batteries (1.5V) oriented so that their polarity is correct. Slide the back cover back into position. How to Use the Remote Control Turns the Soundbar on and off.
WOOFER By pressing the button, you can adjust the volume of the each speaker. TONE •• Press the button to select VIRTUAL CENTER LEVEL and then adjust the volume CONTROL between -6~+6 by using the Up/Down buttons. •• If the Rear Speakers (sold separately) are connected, the setting REAR LEVEL is supported. To adjust the volume of the REAR LEVEL between -6 to +6 by using the Up/ Down buttons. CH LEVEL SOUND MODE CH LEVEL WOOFER By pressing the button, you can set the audio function.
Press the indicated areas to select Up/Down/Left/Right. Up/Down/ PAIR Left/Right SOUND MODE Press Up/Down/Left/Right on the button to select or set functions. •• Repeat To use the Repeat function in “USB” mode, press the Up button. VOL WOOFER •• Music Skip Press the Right button to select the next music file. Press the Left button to select the previous music file.
By pressing the button, you can select the desired sound mode. SOUND MODE SOUND MODE SURROUND SOUND BASS BOOST GAME ADAPTIVE DTS VIRTUAL:X STANDARD –– SURROUND SOUND Provides a wider sound field than standard. WOOFER –– TONE –– CONTROL CH LEVEL BASS BOOST Sound field mode with emphasis on bass sound. GAME Provides stereoscopic sound to immerse you in the action while gaming.
Using the Hidden Buttons (Buttons with more than one function) Hidden Button Reference page Remote Control Button Function WOOFER (Up) TV remote control On/Off (Standby) page 14 Left TV Auto connect On/Off (BT Ready) page 23 Up ID SET page 11 7 Band EQ page 10 DRC ON/OFF (Standby) page 12 Bluetooth Power page 12 Bluetooth Multi-connection On/Off (Standby) page 30 (Sound Control) SOUND MODE PAIR Output specifications for the different sound effect modes Output Effect SURROUND SOUND Bl
Adjusting the Soundbar volume with a TV remote control Adjust the Soundbar volume using the TV’s remote control. •• This function can be used with IR remote controls only. Bluetooth remote controls (remote controls that require pairing) are not supported. •• Set the TV speaker to External Speaker to use this function. •• Manufacturers supporting this function: Samsung, VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, Hisense, RCA 1. Turn Off the Soundbar. 2.
04 CONNECTING THE SOUNDBAR Connecting Electrical Power Use the power components to connect the Subwoofer and Soundbar to an electrical outlet in the following order: 1. Connect the power cord to the Subwoofer. 2. Connect the power output cable to the power adapter, and then to the Soundbar. 3. Connect the power cord to a wall socket. See the illustrations below. •• For more information about the required electrical power and power consumption, refer to the label attached to the product.
Connecting the Soundbar to the Subwoofer When the subwoofer is connected, you can enjoy rich bass sound. Automatic connection between the Subwoofer and the Soundbar When you turn the power on after connecting the power cables to the Soundbar and subwoofer, the subwoofer is automatically connected to the Soundbar. •• When auto pairing is complete, the blue indicators at the rear of the subwoofer turn on.
Manually connecting the Subwoofer if automatic connection fails Before performing the manual connection procedure below: •• Check whether the power cables for the Soundbar and subwoofer are connected properly. •• Make sure that the Soundbar is turned on. 1. Press and hold ID SET on the rear of the subwoofer for at least 5 seconds. •• The red indicator on the rear of the subwoofer turns off and the blue indicator blinks. 5 Sec Rear of Subwoofer 2.
NOTES •• Do not connect the power cord of this product or your TV to a wall outlet until all connections between components are complete. •• Before moving or installing this product, be sure to turn off the power and disconnect the power cord. •• If the main unit is powered off, the wireless subwoofer will go into stand-by mode and the STANDBY LED on the rear of the sub-woofer will turn red after blinking blue several times. •• If you use a device that uses the same frequency (5.
05 USING A WIRED CONNECTION TO THE TV Hear TV sound from your Soundbar through wired or wireless connections. •• When the Soundbar is connected to selected Samsung TVs, the Soundbar can be controlled using the TV’s remote control. –– This feature is supported by 2017 and later Samsung Smart TVs that support Bluetooth when you connect the Soundbar to the TV using an optical cable.
•• If TV sound is inaudible, press the (Source) button on the remote control or on the top of the Soundbar to switch to “D.IN” mode. The screen displays “D.IN” and “TV ARC” in sequence, and TV sound is played. •• If “TV ARC” does not appear in the display window of the Soundbar main unit, confirm that the HDMI cable is connected to the correct port. •• Use the volume buttons on the TV’s remote control to change the volume on the Soundbar.
Method 2. Connecting using an Optical Cable Pre-connection Checklist •• When both the HDMI cable and optical cable are connected, the HDMI signal is received first. •• When you use an optical cable and the terminals have covers, be sure to remove the covers. Optical Cable (not supplied) Bottom of the Soundbar DIGITAL AUDIO IN (OPTICAL) OPTICAL OUT Top of the Soundbar USB (5V 0.5A) AUX IN D.IN 1.
06 USING A WIRELESS CONNECTION TO THE TV Connecting a TV via Bluetooth When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. •• Only one TV can be connected at a time. PAIR OR ND SOUODE M The initial connection 1. Press the PAIR button on the remote control to enter the “BT PAIRING” mode. (OR) a. Press the (Source) button on the top panel and then select “BT”.
Disconnecting the Soundbar from the TV Press the (Source) button on the top panel or on the remote control and switch to any mode but “BT”. •• Disconnecting takes time because the TV must receive a response from the Soundbar. (The time required may differ, depending on the TV model.) •• To cancel the automatic Bluetooth connection between the Soundbar and TV, press the Left button on the remote control for 5 seconds with the Soundbar in “BT READY” status.
07 CONNECTING AN EXTERNAL DEVICE Connect to an external device via a wired connection or Bluetooth connection to play the external device’s sound through the Soundbar. Method 1. Connecting using an HDMI Cable Top of the Soundbar External Device HDMI IN HDMI OUT HDMI HDMI Cable HDMI TO TV (ARC) Bottom of the Soundbar HDMI IN (ARC) HDMI Cable 1. Connect an HDMI cable from the HDMI IN port on the bottom of the Soundbar to the HDMI OUT port on your digital device. 2.
Method 2. Connecting using an Optical Cable BD / DVD player / Set-top box / Optical Cable Game console (not supplied) Bottom of the Soundbar DIGITAL AUDIO IN (OPTICAL) OPTICAL OUT Top of the Soundbar USB (5V 0.5A) AUX IN D.IN 1. Connect DIGITAL AUDIO IN (OPTICAL) on the main unit to the OPTICAL OUT port of the Source Device using a digital optical cable (not supplied). 2. Select “D.IN” mode by pressing the (Source) button on the top panel or on the remote control.
08 CONNECTING A USB STORAGE DEVICE You can play music files located on USB storage devices through the Soundbar. USB port DIGITAL AUDIO IN (OPTICAL) USB (5V 0.5A) HDMI IN HDMI TO TV (ARC) DIGITAL AUDIO IN (OPTICAL) DC 24V USB USB (5V 0.5A) 1. Connect the USB device to the USB port on the bottom of the product. 2. Press the (Source) button on the top panel or on the remote control, and then select “USB”. 3. “USB” appears in the display screen. 4.
09 CONNECTING A MOBILE DEVICE Connecting via Bluetooth When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. •• The connection is limited to one TV or two Bluetooth devices at the same time. PAIR OR Bluetooth device ND SOUODE M The initial connection 1. Press the PAIR button on the remote control to enter the “BT PAIRING” mode. (OR) a. Press the (Source) button on the top panel and then select “BT”.
What is the difference between BT READY and BT PAIRING? •• BT READY : In this mode, you can search for previously connected TVs or connect a previously connected mobile device to the Soundbar. •• BT PAIRING : In this mode, you can connect a new device to the Soundbar. (Press the on the remote control or press and hold the PAIR button (Source) button on the top of the Soundbar for more than 5 seconds while the Soundbar is in “BT” mode.
Disconnecting the Bluetooth device from a Soundbar You can disconnect a Bluetooth device from the Soundbar. For instructions, see the Bluetooth device’s user manual. •• The Soundbar will be disconnected. •• When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display “BT DISCONNECTED” on the front display. Disconnecting the Soundbar from the Bluetooth device Press the (Source) button on the top panel or on the remote control, and then change to any mode except “BT”.
Bluetooth Multi connection The Soundbar can be connected to 2 Bluetooth devices at the same time. Bluetooth device A Bluetooth device B 1. Connect the Soundbar to up to two Bluetooth devices. (See page 27) 2. Play music from one of the connected Bluetooth devices while two devices are connected. 3. If music is played from the Bluetooth device “B” while playing from the device “A”, the music is started playing on the device “B” and automatically being stopped/paused playback on the device “A”. 4.
10 INSTALLING THE WALL MOUNT Wallmount Components Wall Mount Guide Installation Precautions x2 x2 •• Install on a vertical wall only. (M4 x L10) •• Do not install in a place with high temperature or humidity. Holder-Screw •• Verify whether the wall is strong enough to Screw x2 support the product’s weight. If not, reinforce the wall or choose another installation point.
2. Align the Wall Mount Guide’s Center Line 5. Push a screw (not supplied) through each with the center of your TV (if you are Holder-Screw, and then screw each screw mounting the Soundbar below your TV), and firmly into a support screw hole. then fix the Wall Mount Guide to the wall using tape. (Not supplied) •• If you are not mounting below a TV, place the Center Line in the center of the installation area. 6.
7. Install the Soundbar with the attached Bracket-Wall Mounts by hanging the Bracket-Wall Mounts on the Holder-Screws on the wall. 11 SOFTWARE UPDATE Samsung may offer updates for the Soundbar’s system firmware in the future. USB port DIGITAL AUDIO IN (OPTICAL) USB (5V 0.5A) HDMI IN HDMI TO TV (ARC) DIGITAL AUDIO IN (OPTICAL) DC 24V USB (5V 0.5A) 8. Slide the Soundbar down as shown below so that the Bracket-Wall Mounts rest securely If an update is offered, you can update the on the Holder-Screws.
Update Procedure If UPDATE is not displayed Important: The update function erases all user 1. Turn off the Soundbar, disconnect and then settings. We recommend you write down your reconnect the USB storage device that settings so that you can easily reset them after contains the update files to the Soundbar’s the update. Note that updating the firmware USB port. resets the subwoofer connection too. 2. Disconnect the Soundbar’s power cord, 1.
12 TROUBLESHOOTING Before seeking assistance, check the following. Soundbar does not turn on. Subwoofer does not output any sound. ;; Check whether the power cord of the Soundbar is correctly inserted into the outlet. ;; Check whether the LED indicator on the rear of the Subwoofer is on in blue. Reconnect the Soundbar and Subwoofer if the indicator is blinking in blue or turned red. (See page 17.) ;; You may experience an issue if there is an obstacle between the Soundbar and Subwoofer.
There is no sound in when connecting to the TV in HDMI TO TV (ARC) mode. Sound drops out when connected via Bluetooth. ;; Your device is unable to play the input signal. Change the TV’s audio output to PCM or Dolby Digital. (For a Samsung TV: Home ( ) → Menu → Settings ( ) → All Settings ( ) → Sound → Expert Settings → Digital Output Audio Format) ;; If your device that is connected via Bluetooth moves too far away from the Soundbar, it may cause the sound to drop out.
13 LICENSE [ENERGY STAR] ENERGY STAR qualified model only –– Your Samsung product is ENERGY STAR qualified in its factory default setting. Change to certain features, settings and functionality in this product can change the power consumption, possibly beyond the limits required for ENERGY STAR qualification. –– Environmental Protection Agency and Department of Energy. ENERGY STAR is a joint program of the Government agencies, designed to promote energy efficient products and practices. Refer to www.
14 OPEN SOURCE LICENSE NOTICE . To send inquiries and requests for questions regarding open sources, contact Samsung Open Source (http://opensource.samsung.com) 15 IMPORTANT NOTES ABOUT SERVICE Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
16 SPECIFICATIONS AND GUIDE Specifications Model Name HW-B550 USB 5V/0.5A Weight 2.1 kg Dimensions (W x H x D) 860.0 x 59.4 x 75.0 mm Operating Temperature Range +5°C to +35°C Operating Humidity Range 10 % ~ 75 % AMPLIFIER 160W(40Wx4) Rated Output power Supported play formats (DTS 2.0 and DTS Virtual:X sound are played in LPCM 2ch, Dolby Audio™ (supporting Dolby® DTS format.) Subwoofer Name Digital), DTS, DTS Virtual:X PS-WB65D Weight 5.1 kg Dimensions (W x H x D) 184.0 x 346.0 x 295.
INFORMACIÓN DE SEGURIDAD ADVERTENCIAS DE SEGURIDAD PARA REDUCIR EL PELIGRO DE DESCARGA ELÉCTRICA, NO RETIRE LA TAPA (NI LA PARTE TRASERA). NO CONTIENE ELEMENTOS QUE DEBA REEMPLAZAR EL USUARIO. EN CASO DE AVERÍA, SOLICITE LA AYUDA DE PERSONAL ESPECIALIZADO. Consulte la tabla a continuación para obtener una explicación de los símbolos que podrían aparecer en su producto Samsung. ADVERTENCIA •• Para reducir el riesgo de incendio o de descarga eléctrica, no exponga este aparato a la lluvia ni a lahumedad.
PRECAUCIONES 1. Asegúrese de que la fuente de alimentación de CA de su hogar cumpla con los requisitos mencionados en la etiqueta de identificación ubicada en la parte inferior del producto. Instale el producto horizontalmente, sobre una base adecuada (mueble), con espacio suficiente a su alrededor para ventilación 7~10 cm. Asegúrese de que los orificios de ventilación no queden tapados. No coloque la unidad sobre amplificadores o cualquier otro equipo que pueda generar calor.
ÍNDICE 01 Verificación de los Componentes 6 02 Descripción del Producto 7 03 Panel frontal/panel superior de la Soundbar -------------------------- 7 Panel inferior de la Soundbar -------------------------- 8 Uso del Control Remoto 9 Colocación de las pilas antes de utilizar el control remoto (2 pilas AAA) -------------------------- 9 Cómo utilizar el control remoto -------------------------- 9 Uso de los botones ocultos (botones con más de una función) -------------------------- 13 E
07 Conexión de un Dispositivo Externo 24 Método 1. Conexión con un cable HDMI -------------------------- 24 Método 2.
01 VERIFICACIÓN DE LOS COMPONENTES SOUND MODE WOOFER CH LEVEL Unidad principal de la Soundbar TONE CONTROL Subwoofer Control remoto / Pilas (No disponible en algunos lugares o para algunos modelos) Adaptador de CA/CC (Soundbar) Cable HDMI x2 Cable de alimentación (Subwoofer, Soundbar) x2 Guía para montaje en la pared Tornillo de sujeción x2 x2 (M4 x L10) Tornillo Soporte de montaje en la pared •• Para la fuente de alimentación y el consumo de energía, consulte la etiqueta pegada en el producto
02 DESCRIPCIÓN DEL PRODUCTO Panel frontal/panel superior de la Soundbar Panel superior Pantalla Muestra el estado del producto y el modo actual. Botón (Encendido) Permite encender y apagar la Soundbar. •• Función de Auto Power Down La unidad se apaga automáticamente en las siguientes situaciones. –– Modo D.IN / HDMI / BT / USB: Si no hay señal de audio por 20 minutos. Botón (Volumen) Permite ajustar el volumen.
Panel inferior de la Soundbar HDMI IN DIGITAL AUDIO IN (OPTICAL) DIGITAL AUDIO IN DIGITAL AUDIO IN DIGITAL AUDIO IN (OPTICAL) (OPTICAL) (OPTICAL) USB (5V 0.5A) HDMI IN HDMI IN HDMI IN HDMI IN HDMI IN HDMI IN USB (5V 0.5A) USB (5V 0.5A) USB (5V 0.5A) HDMI TO TV HDMI TO TV (ARC) (ARC) DIGITAL AUDIO IN (OPTICAL) DIGITAL AUDIO IN (OPTICAL) DIGITAL AUDIO IN USB (5V 0.5A) (OPTICAL) USB (5V 0.5A) HDMI IN TO TV HDMI (ARC) HDMI IN USB (5V 0.
03 USO DEL CONTROL REMOTO Colocación de las pilas antes de utilizar el control remoto (2 pilas AAA) Deslice la contratapa en dirección de la flecha hasta retirarla completamente. Coloque 2 pilas AAA (1.5V) tal como se indica para que la polaridad sea correcta. Vuelva a deslizar la contratapa hasta su posición. Cómo utilizar el control remoto Enciende y apaga la Soundbar.
WOOFER Puede presionar este botón para ajustar el volumen de cada altavoz. TONE •• Presione CONTROLel botón para seleccionar VIRTUAL CENTER LEVEL y, luego, ajuste el volumen entre -6 y +6 con los botones Arriba/Abajo. •• Cuando se conectan los altavoces traseros (que se venden por separado), se admite la configuración REAR LEVEL. Para ajustar el volumen de REAR LEVEL entre -6 y +6, use los botones Arriba/Abajo.
Presione las áreas indicadas para seleccionar Arriba/Abajo/ Izquierda/Derecha. Arriba/Abajo/ PAIR Izquierda/ SOUND MODE Derecha Presione Arriba/abajo/izquierda/derecha para seleccionar o configurar las funciones. •• Repetir Para utilizar la función Repetir en el modo “USB”, presione el botón Arriba. VOL WOOFER •• Saltear canciones Presione el botón Derecha para seleccionar el próximo archivo de música. Presione el botón Izquierda para seleccionar el archivo de música anterior.
Puede seleccionar el modo de sonido que desea presionando el botón. SURROUND SOUND BASS BOOST GAME ADAPTIVE DTS VIRTUAL:X STANDARD SOUND MODE –– SURROUND SOUND Provee un campo acústico más amplio que el estándar. – – BASS BOOST WOOFER Modo de campo sonoro con énfasis en los sonidos graves. TONE–– GAME CH LEVEL CONTROL Provee sonido estereoscópico y lo sumerge en la acción mientras juega.
Uso de los botones ocultos (botones con más de una función) Botón oculto Página de referencia Botón del mando a distancia Función WOOFER (Arriba) Encendido/Apagado control remoto del TV (espera) Página 14 Izquierda Conexión automática del TV (BT listo) Página 23 Arriba ID SET Página 11 EQ 7 bandas Página 10 DRC ON/OFF (espera) Página 12 Bluetooth Power Página 12 Conexión Bluetooth múltiple activada/ desactivada (espera) Página 30 (Control de sonido) SOUND MODE PAIR Especificaciones de
Ajuste del volumen de la Soundbar con un control remoto de televisor Ajuste el volumen de la Soundbar con el control remoto del televisor. •• Esta función solo se puede usar con controles remotos IR. Los controles remotos Bluetooth (controles remotos que requieren emparejamiento) no son compatibles. •• Configure el parlante del televisor en Altavoz externo para usar esta función. •• Fabricantes que admiten esta función: Samsung, VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, Hisense, RCA 1.
04 CONEXIÓN DE LA SOUNDBAR Conexión del suministro eléctrico Utilice los componentes de alimentación para conectar el subwoofer y la Soundbar a un tomacorriente en el siguiente orden: 1. Conecte el cable de alimentación al subwoofer. 2. Conecte el cable de alimentación al adaptador de energía y, luego, a la Soundbar. 3. Conecte el cable de alimentación a un enchufe. Consulte las siguientes ilustraciones. •• Para la fuente de alimentación y el consumo de energía, consulte la etiqueta pegada en el producto.
Conexión de la Soundbar al subwoofer Cuando el subwoofer está conectado, puede disfrutar de sonidos graves potentes. Conexión automática entre el subwoofer y la Soundbar Cuando lo enciende después de conectar los cables de alimentación a la Soundbar y el subwoofer, el subwoofer se conectará automáticamente a la Soundbar. •• Cuando finaliza el emparejamiento automático, se enciende el indicador azul de la parte posterior del altavoz de graves.
Conexión manual del subwoofer en caso de error en la conexión automática Antes de realizar el procedimiento de conexión manual que figura a continuación: •• Verifique si los cables de alimentación de la Soundbar y el subwoofer están conectados correctamente. •• Asegúrese de que la Soundbar esté encendida. 1. Mantenga presionado ID SET en la parte posterior del subwoofer durante al menos 5 segundos. •• El indicador rojo de la parte posterior del subwoofer se apaga y el indicador azul parpadea.
NOTAS •• No conecte el cable de alimentación de este producto ni de su televisor a una toma de pared hasta realizar todas las conexiones entre los componentes. •• Antes de mover o instalar este producto, asegúrese de apagar el equipo y desconectar el cable de alimentación. •• Si la unidad principal está apagada, el subwoofer inalámbrico pasará a modo de espera y el LED de STANDBY de la parte posterior se verá rojo después de parpadear con una luz azul varias veces.
05 USO DE UNA CONEXIÓN CON CABLE AL TV Escuche el sonido de su televisor desde su Soundbar a través de conexiones por cable o inalámbricas. •• Cuando la Soundbar está conectada a un televisor Samsung seleccionado, esta se puede controlar mediante el control remoto del televisor. –– Esta función es compatible con Samsung Smart TV, modelos 2017 o posteriores, que admitan Bluetooth cuando conecte la Soundbar al televisor usando un cable óptico.
•• Si no se escucha el sonido del televisor, presione el botón (Fuente) en el control remoto o en la parte superior de la Soundbar para cambiar al modo “D.IN”. En la pantalla aparece “D.IN” y “TV ARC” en secuencia, y se escucha el sonido del televisor. •• Si el “TV ARC” no aparece en la ventana de visualización de la unidad principal de la Soundbar, verifique que el cable HDMI esté conectado al puerto correspondiente.
Método 2. Conexión con un cable óptico Lista de verificación previa a la conexión •• Cuando el cable HDMI y el cable óptico estén conectados al mismo tiempo, la señal HDMI se recibe primero. •• Cuando use un cable óptico y las terminales tengan cubiertas, asegúrese de quitarlas. Cable óptico Parte inferior de la Soundbar (no suministrado) DIGITAL AUDIO IN (OPTICAL) OPTICAL OUT Parte superior de la Soundbar USB (5V 0.5A) AUX IN D.IN 1.
06 USO DE UNA CONEXIÓN INALÁMBRICA AL TV Conexión a través de Bluetooth Cuando un televisor está conectado a través de Bluetooth, puede escuchar sonido estéreo sin utilizar varios cables. •• Solo puede conectar un televisor a la vez. PAIR O ND SOUODE M La conexión inicial 1. Presione el botón (O) PAIR en el control remoto para ingresar al modo “BT PAIRING”. a. Presione el botón (Fuente) en el panel superior y, luego, seleccione “BT”.
Desconexión de la Soundbar del televisor Presione el botón (Fuente) en el panel superior o en el control remoto y cambie a cualquier modo excepto “BT”. •• La desconexión lleva tiempo porque el televisor debe recibir una respuesta de la Soundbar. (El tiempo que dura la desconexión puede variar según el modelo del televisor).
07 CONEXIÓN DE UN DISPOSITIVO EXTERNO Conecte un dispositivo externo a través de un cable o de una conexión de Bluetooth para reproducir el sonido del dispositivo exterior a través de la Soundbar. Método 1. Conexión con un cable HDMI Parte superior de la Soundbar HDMI Dispositivo externo HDMI OUT HDMI IN Cable HDMI HDMI TO TV (ARC) Parte inferior de la Soundbar HDMI IN (ARC) Cable HDMI 1.
Método 2. Conexión con un cable óptico Reproductor de Blu-ray/ Reproductor de Cable óptico (no suministrado) DVD/Decodificador/ Consola de juegos Parte inferior de la Soundbar DIGITAL AUDIO IN (OPTICAL) OPTICAL OUT Parte superior de la Soundbar USB (5V 0.5A) AUX IN D.IN 1. Conecte la DIGITAL AUDIO IN (OPTICAL) de la unidad principal a la toma OPTICAL OUT del dispositivo fuente con un cable óptico (no suministrado) digital. 2. Seleccione el modo “D.IN” presionando el botón remoto.
08 CONECTAR UN DISPOSITIVO DE ALMACENAMIENTO USB Puede reproducir archivos de música que se encuentran en dispositivos de almacenamiento a través de la Soundbar. Puerto USB DIGITAL AUDIO IN (OPTICAL) USB (5V 0.5A) HDMI IN HDMI TO TV (ARC) DIGITAL AUDIO IN (OPTICAL) DC 24V USB USB (5V 0.5A) 1. Conecte el dispositivo USB en el puerto USB en la parte inferior del producto. 2. Presione el botón (Fuente) en el panel superior o en el control remoto y, luego, seleccione “USB”. 3.
09 CONEXIÓN DE UN DISPOSITIVO MÓVIL Conexión vía Bluetooth Cuando un dispositivo móvil está conectado a través de Bluetooth, puede escuchar sonido estéreo sin utilizar varios cables. •• La conexión se limita a un TV o dos dispositivos Bluetooth al mismo tiempo. PAIR O Dispositivo Bluetooth ND SOUODE M La conexión inicial 1. Presione el botón (O) PAIR en el control remoto para ingresar al modo “BT PAIRING”. a. Presione el botón (Fuente) en el panel superior y, luego, seleccione “BT”.
¿Cuál es la diferencia entre BT READY y BT PAIRING? •• BT READY : En este modo, puede buscar los televisores que se conectaron anteriormente o conectar un dispositivo móvil que conectó anteriormente a la Soundbar. •• BT PAIRING : En este modo, puede conectar un dispositivo nuevo a la Soundbar. (Presione el botón PAIR en el control remoto o mantenga presionado el botón (Fuente) en la parte superior de la Soundbar durante más de 5 segundos mientras la Soundbar está en modo “BT”.
Desconexión del dispositivo Bluetooth de la Soundbar Puede desconectar el dispositivo Bluetooth de Soundbar. Para obtener instrucciones, consulte el manual del usuario del dispositivo Bluetooth. •• Soundbar se desconectará. •• Cuando se desconecta la Soundbar del dispositivo Bluetooth, aparecerá “BT DISCONNECTED” en la pantalla frontal de la Soundbar.
Conexión Bluetooth múltiple La Soundbar se puede conectar a 2 dispositivos Bluetooth al mismo tiempo. Dispositivo Bluetooth A Dispositivo Bluetooth B 1. Conecte la Soundbar a dos dispositivos Bluetooth. (Consulte la página 27) 2. Reproduzca música de uno de los dispositivos Bluetooth conectados mientras hay dos dispositivos conectados . 3.
10 INSTALACIÓN DEL SOPORTE DE MONTAJE EN LA PARED Componentes de soporte Guía para montaje en la pared x2 x2 (M4 x L10) Tornillo de sujeción Precauciones para la instalación Tornillo x2 •• Instálelo en una pared vertical únicamente. •• No lo instale en un lugar donde la temperatura sea alta o haya humedad. Soporte de montaje en la pared •• Verifique si la pared es lo suficientemente resistente como para soportar el peso del producto. Si no lo es, refuerce la pared o elija otro lugar 1.
2. Haga coincidir la Línea central de la guía 5. Pase un tornillo (no suministrado) por cada para montaje en la pared con el centro de su Tornillo de sujeción y luego ajuste cada televisor (si va a montar la Soundbar debajo tornillo con firmeza en un orificio de soporte de su televisor) y luego fije la Guía para del tornillo. montaje en la pared a la pared con cinta adhesiva.
7. Para instalar la Soundbar con el Soporte de montaje en la pared ya colocado, cuelgue el soporte de montaje en la pared de los Tornillos de sujeción que están en la pared. 11 ACTUALIZACIÓN DEL SOFTWARE Es posible que Samsung ofrezca actualizaciones para el firmware del sistema de la Soundbar en el futuro. Puerto USB DIGITAL AUDIO IN (OPTICAL) USB (5V 0.5A) HDMI IN HDMI TO TV (ARC) DIGITAL AUDIO IN (OPTICAL) DC 24V USB (5V 0.5A) 8.
Procedimiento de actualización Importante: La función de actualización borra todas las configuraciones del usuario. Le recomendamos que anote sus configuraciones para poder restablecerlas fácilmente después de la actualización. Tenga en cuenta que actualizar el firmware también restablece la conexión del subwoofer. 1. Conecte un dispositivo de memoria USB al puerto USB de su computadora.
12 SOLUCIÓN DE PROBLEMAS Antes de buscar ayuda, controle lo siguiente. La Soundbar no se enciende. No sale ningún sonido del altavoz de graves. ;; Compruebe si el cable de alimentación de la Soundbar se insertó correctamente en el enchufe. ;; Compruebe si el indicador LED en la parte posterior del Subwoofer está encendido en color azul. Vuelva a conectar la Soundbar y el Subwoofer si el indicador parpadea en azul o está en rojo. (Consulte la página 17.
No hay sonido cuando se conecta al televisor en modo HDMI TO TV (ARC). No hay sonido cuando se conecta mediante Bluetooth. ;; Es posible que su dispositivo no pueda reproducir la señal de entrada. Cambie la salida de audio del televisor a PCM o Dolby Digital. (Con un televisor Samsung: Inicio ( ) → Menú → Config. ( ) → Todos los ajustes ( ) → Sonido → Configuración experta.
13 LICENCIA [ENERGY STAR] ENERGY STAR qualified model only –– Your Samsung product is ENERGY STAR qualified in its factory default setting. Change to certain features, settings and functionality in this product can change the power consumption, possibly beyond the limits required for ENERGY STAR qualification. –– Environmental Protection Agency and Department of Energy. ENERGY STAR is a joint program of the Government agencies, designed to promote energy efficient products and practices. Refer to www.
14 AVISO SOBRE LICENCIA DE CÓDIGO ABIERTO Para enviar consultas y solicitudes o preguntas sobre fuentes abiertas, comuníquese con Samsung Open Source (http://opensource.samsung.com) 15 NOTA IMPORTANTE SOBRE EL SERVICIO Las figuras e ilustraciones de este Manual del usuario se facilitan sólo como referencia y pueden diferir del aspecto real del producto.
16 ESPECIFICACIONES Y GUÍA Especificaciones Nombre del modelo HW-B550 USB 5V/0,5A Consumo energético 24V Consumo eléctrico (méxico sólo) 25W (méxico sólo) Peso 2,1 kg Dimensiones (An x Al x Pr) 860,0 x 59,4 x 75,0 mm Rango de temperatura de servicio +5°C a +35°C Rango de humedad de servicio 10 % a 75 % AMPLIFICADOR Potencia nominal de salida 160W (40Wx4) Formatos de reproducción compatibles (El sonido DTS 2.0 y DTS Virtual:X se reproduce en formato DTS.
© 2022 Samsung Electronics Co., Ltd. All rights reserved. Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care Center. Country Samsung Service Center Web Site ` Latin America MEXICO 800-SAMSUNG www.samsung.com/mx/support BRAZIL 0800 555 0000 (Demais cidades e regiões) 4004-0000 (Capitais e grandes centros) www.samsung.