User Manual

English _43
Setting the Profiles
Setting the Recording Profile
You can set the video profile where the recording will be played for the camera connected to each channel.
Setup > Camera > Profile setup > Record
￭
You can configure the settings only for the profiles that are supported by the camera.
￭
If the profiles used for recording and network are different, camera's video feed may not comply with the frame rate as specified in the
camera.
￭
It is recommended to set the identical codec for the Record/Live/Remote protocol when setting the camera profile.
￭
As for the analog camera, you can set the standard save and event save profiles separately.
￭
When setting the record profile for the analog camera, you cannot save more than one mainstream profile at the same time.
●
: Displays the camera of the corresponding channel as a list or a thumbnail.
●
Camera name : Display the camera name.
●
IP & Port : Displays the IP or port location of the camera.
●
Profile : You can select the recording profile for selected channel.
●
Codec : You can check the codec for selected channel.
●
Resolution : You can select the resolution for selected channel.
●
Frame rate : You can set the frame rate for selected recording profile.
●
Edit : You can add, change, and delete the camera profiles.
Setting the Live Profile
You can change the live setup for the camera.
Setup > Camera > Profile setup > Live
●
: Displays the camera of the corresponding channel as a list or a thumbnail.
●
Camera name : Display the camera name.
●
IP & Port : Displays the IP or port location of the camera.
●
Live replacement : You can select the live profile setup mode.
If you select <Manual> the profile setup items are enabled, and you can change settings manually.
￭
As for the analog camera, Live replacement function cannot be set.
– Auto : For the profile for live monitoring, a profile optimized for each split mode is displayed, along with the
‘Live4NVR' profile automatically generated at the time of the camera registration.
￭
Live4NVR profile default : H.264 800 x 600, 800 x 448 30 fps
– Manual : Live monitoring is performed with the profile selected by the user from the registered camera
profiles.
– Record : Live monitoring is performed with the profile set for recording.
●
Profile : You can set the camera profile.
●
Codec : Show the codec of the selected profile.
●
Resolution : Show the resolution of the selected profile.
●
Frame rate : Show the frame rate of the selected profile.
●
Edit : You can add, change, and delete the camera profiles.
• SETUP