Use and Care Manual
Wireless network
127
Using Auto Backup to send photos or videos
You can send photos or videos that you captured with the camera to a PC wirelessly.
Sending photos or videos to a PC
1
Rotate the mode dial to
w
.
2
Select .
•
If the pop-up message that prompts you to download the application
appears, select Next.
•
The camera will automatically attempt to connect to a WLAN via the most
recently connected AP device.
•
If the camera has not previously been connected to a WLAN, it will search for
available AP devices. (p. 115)
Installing the program for Auto Backup on your PC
1
Install i-Launcher on the PC. (p. 108)
2
Connect the camera to the PC with the USB cable.
3
When the Auto Backup program icon appears, click it.
•
The Auto Backup program is installed on the PC. Follow the on-screen
instructions to complete the installation.
4
Remove the USB cable.
Before installing the program, ensure that the PC is connected to a network.