User Manual

English - 8
7
Sanitize /
(Control Lock)
Control Lock allows you to lock the buttons on the control panel so children
cannot accidently start the dishwasher by pressing the buttons on the
panel.
To lock and unlock the buttons on the control panel, hold the Sanitize
button down for three (3) seconds when power is On.
8
Delay Start
(DISPLAY)
Delay a cycle for up to 24 hours in one-hour increments. The hour displayed
indicates the time at which the wash will be started.
Displays wash information, Delay Start hours, and Error messages.
If an trouble occurs during an operation, an check message is displayed
with a warning sound. Refer to “Information codes” on page 30.
9
Start
To start a cycle, press the Start button before closing the door.
To cancel the cycle, press and hold the Start button for 3 seconds or press
the Power button to power off.
You can select options (Lower Rack, StormWash™, Hi-Temp Wash, Sanitize) before starting a
cycle. If you change the cycle after selecting an option, the original cycle is reset.
To prevent the touchpad from losing response sensitivity, follow these instructions:
- Touch the center of each keypad using one fi nger. Do not push.
- Clean the touch control’s surface regularly with a soft, damp cloth.
- Be careful not to touch more than one touch key pad at a time, except as directed.
When you pause a cycle by opening the door during operation, press the Start button before closing
the door to continue the cycle.
Push door fi rmly closed within 3 seconds of pressing Start button.
If the door is not closed within 3 seconds, the cycle will not start.
setting up your dishwasher
OO X
DW7000KM-02025A-01_EN.indd Sec3:8DW7000KM-02025A-01_EN.indd Sec3:8 2016-05-18  10:44:572016-05-18  10:44:57