User Manual

English - 30

INFORMATION CODES

The Control Panel displays information codes to help you understand what is occurring with your

dishwasher.

Code Action

Over-level water check

• Functional check. Close the water supply valve and go to your house circuit

breaker panel, set the dishwasher’s circuit breaker switch to o , and then

contact an authorized Samsung service center.

Leakage check

• If a water supply valve connection leak occurs, close the water supply valve

and go to your house circuit breaker panel, set the dishwasher’s circuit breaker

switch to o , and then contact the installer to ﬁ x.

If the problem continues, contact an authorized Samsung service center.

Water supply check

• Check if the water supply valve is closed, the water supply is suspended, or the

water inlet valve or line is frozen or clogged by foreign particles.

If the problem continues, close the water supply valve, and then contact an

authorized Samsung service center.

Drain check

• After closing the water supply valve, check whether the drain hose is clogged or

folded. Also, check whether drain hole inside sump is clogged.

If the problem continues, contact an authorized Samsung service center.

High temperature heating check

• The product ensure that the temperature for hot water line is not too high and

adjusts to appropriate temperature (120 ˚F (49 ˚C) - 149 ˚F (65 ˚C)) automatically.

If the problem continues, go to your house circuit breaker panel, set the

dishwasher’s circuit breaker switch to o , and then contact an authorized

Samsung service center.

Pump operation check

• Functional check. Turn o the dishwasher and try to start it again.

If the problem continues, contact an authorized Samsung service center.

For any codes not listed above, call 1-800-SAMSUNG (726-7864)

troubleshooting

DW7000KM-02025A-01_EN.indd Sec7:30DW7000KM-02025A-01_EN.indd Sec7:30 2016-05-18  10:45:062016-05-18  10:45:06