Use and Care Manual

English - 25
PROBLEM POSSIBLE CAUSE SOLUTION
ozzle hole clogged with
food particles.
Clean the nozzle hole . See page 20.
The nozzle is blocked by a dish or
pot and cannot rotate.
After placing the dishes into the racks,
rotate the nozzles by hand to check
whether any of the dishes interfere with
them.
Water won’t
pump out of the
dishwasher.
The drain is clogged. Contact a qualif ied service technician to
remove any obstruction from the drain hose
and check the drain pump operation.
Has a bent upper
rack after loading
dishes.
The dishes are not loaded
properly.
Load your dishes as recommended.
(See page 14.)
06 troubleshooting
ozzle does not
rotate smoothly.
N
N s are s
Cannot close the
door.
AutoRelease™ Dry mode is in
operation.(For applicable models)
Once the door opens in the AutoRelease™
Dry mode, the door cannot be closed
manually for the next 2 minutes. You may
close the door after 2 minutes.