user manual

SHR-2040/2041/2042 USER’S MANUAL
10-7
4
Factory Default
This restores the Network information and preset values in SHR-2040/2041/2042 to
the original state at the time of factory shipment.
Factory Default will be done as follows;
- Use System / Load Factory Default in MENU or,
- If you hold on to the Mode button in Live Mode and keep pressing the CH5
button for 5 seconds, the system will return to the Factory default condition.
The front button repeats the flickering.
Classification Detailed Items Factory Setup
Date Format YYYY-MM-DD
Time Format 24 Hours
Language English
Summer Time Off
Password 4321
Password Lock On
Disk End Mode Stop
Disk End Beep Off
Video On
Audio On
Title CAM_01 ~ CAM_4
Auto Seq. 5 sec
ID Camera No.
Protocol None
Baudrate 9600
Parity None
Data 8
Stop 1
Serial Mode Half Duplex
Brightness 50
Contrast 50
Color 50
System Setup
Camera Setup
PTZ Device
Camera Config
HDD Mode
Time/Date/Language
Password
Screen Setup
SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 10-7