DVD Recorder Instruction Manual

Connecting & Setting Up

Case 3 : Component Video

output jacks

1. Connect Component video cables(not supplied)

between the COMPONENT OUT(Y,P

) jacks on

DVD Recorder and COMPONENT IN(Y,P

) jacks

on your TV.

2. Connect audio cables (white and red) between the

AUDIO OUT jacks on the DVD Recorder and AUDIO

IN jacks on TV (or AV amplifier).

(See pages 21-22).

3. After connecting, refer to the page 34 to 35.

●

You will enjoy high quality and accurate colour

reproduction images.

■

Make sure that the colour coded

connections match. The Y, P

, P

component output jacks of your DVD

Recorder must be connected to the exact

corresponding component input jacks on

your TV.

■

Progressive setting is only available when

the Video Out is set to Component.

(See page 34)

NOTE

green

blue

red

green

blue

red

- English

Case 2 : Connecting to an

S-Video output jack

1. Connect an S-Video cable (not included) between the

S-VIDEO OUT jack on DVD Recorder and S-VIDEO

INPUT jack on your TV (or AV amplifier).

2. Connect audio cables (white and red) between the

AUDIO OUT jacks on DVD Recorder and AUDIO IN

jacks on TV (or AV amplifier).

●