User Manual

Connecting & Setting Up
English - 17
Case 2 : Connecting DVD Recorder & VCR
to a Satellite Receiver or Other Equipment
▌
You can connect your DVD Recorder & VCR to a
Satellite receiver or other DVD Recorder & VCR
using the SCART cable if the appropriate outputs are
available on the equipment chosen.
The following illustrations give a few examples of the
connection possibilities.
1. AV1(TV): By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or other
equipment into the AV1(TV) jack on the rear of the
DVD Recorder & VCR.
After making this connection, select the source by
pressing the INPUT SEL. button for the AV1 input
sources.
2. By means of RF Cable
After making this connection, you must preset the
station received through the satellite tuner.
RF output channel of the satellite receiver should be
adjusted away from channel 36, which is used by the
DVD Recorder & VCR, e.g. re-adjust to channel 33.
1. AV2 IN (EXT): By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or other
equipment into the AV2 (EXT) jack on the rear of the
DVD Recorder & VCR.
After making this connection, select the source by
pressing the INPUT SEL. button for the AV2 input
sources.
2. By means of RF Cable
After making this connection, you must preset the
station received through the satellite tuner.
RF output channel of the satellite receiver should be
adjusted away from channel 36, which is used by the
DVD Recorder & VCR, e.g. re-adjust to channel 33.
3. AV1 (TV) : By means of 21-pin Scart Cable
Connect the end of the SCART cable to the AV1 (TV)
jack on the rear of the DVD Recorder & VCR. Plug
the other end into the appropriate connector on the
television.
TV
ANT
RF Cable
Satellite Receiver or other
Equipment
Aerial Connector
Satellite Receiver or other
Equipment
Aerial Connector
TV
ANT
RF Cable
01293M-VR350,355-XEH-ENG.indb 1701293M-VR350,355-XEH-ENG.indb 17 2007-03-12 오후 12:13:202007-03-12 오후 12:13:20