User Manual

English - 65
Recording
1
Press INFO button on the remote control.
The following information will be displayed.
(Current deck status, recording speed, remaining
time, input channel, current time.)
4
Press the  (REC) button on the remote control or
front panel.
For options while recording is in progress, see
“Special Recording Features”.
5
Press the STOP button to stop or finish a record-
ing in progress.
 When you watch or record on the VCR during DVD
Recording, some function buttons may not operate.
The message “This function is not available.” will
be displayed.
Note
Maximum Recording Time - SP vs. LP
Tape Length Recording Time (in SP)
E180 180 mins or 3 hours
E240 240 mins or 4 hours
E280 280 mins or 4 hours and 40mins
E300 300 mins or 5 hours
Check Remaining Time
Pausing / Resuming
• Press the REC PAUSE button to pause a recording
in progress.
• Press the REC PAUSE button again during pause to
resume recording.
• You can switch programme by pressing the
PROG/TRK (
/ ) buttons while recording pauses.
STOP
00:00:00
SP
Rem 00:48
PR 1
-RW
STOP
00:00:00
SP
Rem 01:21
PR 1
VCR
JAN 01 2006 SUN 12 : 00
Basic VCR Recording
Before starting
1. Check TV channel and Antenna connections.
2. Check the remaining time on the tape.
You can record a TV show in progress by inserting a
blank tape and pressing the
 (REC) button. You can
even add time in preset increments up to 9 hours by
pressing the
 (REC) button repeatedly.
1
Insert a blank VHS tape into the VCR deck.
• Make sure the tape is long enough to record the
entire programme.
2
Press the Number buttons or the PROG/TRK (
/ ) buttons to select the desired channel.
Press the INPUT SEL. button to select AV1,
AV2, AV3 (or DV input : DVD-VR331,VR335,
VR336 only) if recording from an external device
connected to the input jacks of the recorder.
3
Press the REC SPEED button on the remote
control to set the Record Speed to one of the
following options:
• SP – Standard Play, for best picture quality.
• LP – Long Play, for maximum recording time
(3 times SP).
 Be sure your videotape has a Record Safety Tab.
If the tab is missing, you can cover the opening
with a small piece of tape.
 Warning: Do not cover this opening unless you
are sure you want to record over the tape.
Note
CAUTION
 The selected Record Speed will appear on the
front panel display and on-screen display.
Note
01010A-VR330/336-XEU-ENG2 2006.3.22 1:51 PM Page 65