User Manual

English - 39
System Setup
If your TV supports Progressive Scan, press the
P.SCAN button on the front of the DVD Recorder &
VCR to enjoy.
Setting up the progressive scan
1
In Stop mode, press the P.SCAN button on the
front of the DVD Recorder & VCR
2
Press the œ√buttons to select the Yes, and then
press the OK button.
3
Set your TV to Progressive input (using TV remote
control.)
Progressive scan
No
Yes
Press [Yes] to confirm Progressive scan mode.
Otherwise, press [No].
■
The Quick Recording is set to Off as default.
■
If this function is set to on, power consumption
will be increased when the unit is powered off.
Note
■
Progressive setting is only available when
the DVD Recorder & VCR is in stop mode.
Note
Canceling the progressive scan
1
In Stop mode, press the P.SCAN button on the
front of the DVD Recorder & VCR
2
Press the œ√buttons to select the Yes, and then
press the OK button.
3
Set your TV to Interlace input (using TV remote
control.)
No
Yes
Press [Yes] to confirm Interlace scan mode.
Otherwise, press [No].
Output selection (DVD-VR335,VR336 only)
• Connect the DVD Recorder & VCR to your TV via
HDMI or DVI. Set your TV's input to HDMI or DVI.
• Press the P.SCAN button while the unit is in Stop
mode to select the output resolution.
-
If your TV is connected the HDMI or DVI cable,
the output resolution mode changes in the following
sequence each time you press the P.SCAN button:
→ 576p → 720p → 1080i
- If your TV is connected the AV or component
cables(without HDMI/DVI cable), the output resolu-
tion mode toggles 576p/576i in turn.
•
HDMI/DVI cable does not support 576i. Video with
576i resolution can only be viewed through the analog
outputs (Composite/S-Video/Component).
 Even if HDMI/DVI cable is connected to your
TV, the AV connection outputs only 576i and
the component connection outputs only 576p
irrespective of the on-screen display.

Progressive scan automatically activates when HDMI
is connected. (Please make sure PS is indicated
on the front panel of the DVD Recorder & VCR.)
 There will be no HDMI video and audio outputs
unless progressive scan function is activated.
 Consult your TV User’s Manual to find out if
your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV
User’s Manual regarding Progressive Scan
settings in the TV’s menu system.
 If Video Output is set incorrectly, the screen
may be blocked.

The resolutions available for HDMI/DVI output
depend on the connected TV or projector. For details,
see the user’s manual of your TV or projector.
 When the resolution is changed it may take a
few seconds for a normal image to appear.

If you set the HDMI output resolution 720p or
1080i, HDMI output provides better picture quality.
Note
01010A-VR330/336-XEU-ENG1 2006.3.22 1:49 PM Page 39