Operating instructions

Connecting up03
22
En
Caution
• If you choose to install the center speaker
on top of the TV, be sure to secure it with
putty, or by other suitable means, to reduce
the risk of damage or injury resulting from
the speaker falling from the TV in the event
of external shocks such as earthquakes.
• Make sure no exposed speaker wire is
touching the rear panel, this may cause the
receiver to turn off automatically.
Speaker placement diagrams
The following illustrations show 5.1 channel
speaker setups.
3-D view of 5.1 channel speaker setup
Overhead view of speaker setup
Switching the speaker system
Three speaker system settings are possible
using the
SPEAKERS button.
• Use the SPEAKERS button on the front
panel to select a speaker system setting.
1
Press repeatedly to choose a speaker system
option:
•
SP  A – Sound is output from the speakers
connected to the A speaker terminals
(multichannel playback is possible).
•
SP  B – Sound is output from the two
speakers connected to speaker system B
(only stereo playback is possible).
•
SP  AB – Sound is output from speaker
system A (no sound is output from the
Center and the Surround speaker), the two
speakers in speaker system B, and the
subwoofer. Multichannel sources are
downmixed for stereo output from speaker
systems A and B.
Surround
left
Surround
right
Listening position
Front
left
Front
rightCenter
Subwoofer
Note
1• The subwoofer output depends on the settings you made in Speaker Setting on page 42. However, if SP  B is selected above,
no sound is heard from the subwoofer (the LFE channel is not downmixed).
• All speaker systems (except speaker system B connections) are switched off when headphones are connected.
SPEAKERS VSB MODE
SIGNAL
SELECT
SOUND
RETRIEVER
VSX_918_818_KU.book 22 ページ ２００８年５月１５日 木曜日 午後６時４６分