0419 MF68-00325A_Eng 4/19/04 5:11 PM Page b DSB-4700F Instructions for use MF68-00325A DIGITAL SATELLITE RECEIVER REV. 1.
0419 MF68-00325A_Eng 4/19/04 5:11 PM Page d 1 DSB-4700F Warning! Important Safety Instructions
0419 MF68-00325A_Eng 4/19/04 5:11 PM Page 2 Thank you for choosing Samsung! Your new Samsung Digital satellite receiver represents the latest in IRD technology. We designed it with easy-to-use on-screen menus and closed captioning capabilities, making it one of the best products in its class. We are proud to offer you a product that will provide convenient, dependable service and enjoyment for years to come. • Use only a grounded or polarized outlet.
0419 MF68-00325A_Eng 4/19/04 5:11 PM Page 4 CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
0419 MF68-00325A_Eng 4/19/04 5:11 PM Page 6 Warning! Important Safety Instructions General Features . . . . . . . . . . . . . . . . . . Connecting Your “STB” . . . . . . . . . . . . . Description . . . . . . . . . . . . . . . . . . . . . . Front Panel . . . . . . . . . . . . . . . . . . . . . . Rear Panel . . . . . . . . . . . . . . . . . . . . . . Remote Control Unit . . . . . . . . . . . . . . . Basic Functions . . . . . . . . . . . . . . . . . . . Operating The Receiver . . . . . . . . . . . .
0419 MF68-00325A_Eng 4/19/04 5:11 PM Page 8 1. LOCATION OF THE RECEIVER Connecting Figure Your “STB” should be placed under proper ventilation. Don’t put in completely enclosed cabinet that will restrict the flow of air, resulting in overheating. The location should be safeguarded from direct sunlight, excess moisture, rough handling or household pets. Avoid stacking other electronic components on the top of the receiver. The location should be safely accessible by the cable from your antenna system.
0419 MF68-00325A_Eng 4/19/04 5:11 PM Page 10 DSB-4700F DSB-4700F DESCRIPTION DESCRIPTION Rear Panel Front Panel 1 2 1. /I 2. OK 3 4 5 6 1 3 4 5 6 7 8 9 This key is for turning the receiver on and Standby. 1. AC MAINS This key is for entering and confirming any data to the receiver in the menu system. This key is for selecting the item. Press while viewing TV and a list of channels is displayed. This is to plug in the AC mains power cord.
0419 MF68-00325A_Eng 4/19/04 5:11 PM Page 12 DESCRIPTION Remote Control Unit 1. POWER This is for switching the receiver ON/STANDBY mode. 10. ALT(YELLOW) This key is for selecting the soundtrack list for the current service. This key functions same as the YELLOW key on the menu. Press it once and sound track appears. Press it twice and video track appears. The sound and video track services are not provided for every channel and depend on the conditions the operator is in.
0419 MF68-00325A_Eng 4/19/04 5:11 PM Page 14 3. Select Soundtrack 1. Display Screen ● Before you can view the television program, you must perform the installation. Therefore you will see only menu images at first. After the television channels have been programmed, you will see the following picture(banner) each time you switch channels: ● Press YELLOW(ALT) key to see the soundtrack list. Press / and OK key to select one. Channel Number 4.
0419 MF68-00325A_Eng 4/19/04 5:11 PM Page 16 BASIC FUNCTIONS 6.1 Service Favorites ● ● ● 7. Program Information Press the GREEN(TEXT) key on the control unit to select the Favorites list. Press the GREEN(TEXT) key to switch between favorite list and channel list. Use the / , PG+/PG- keys to select a favorite group or a channel that you want. EPG-Electronic Program Guide The electronic program guide gives you information for the channels. Note : 1. This service depends on service provider. 2.
0419 MF68-00325A_Eng 4/19/04 5:11 PM Page 18 OPERATING THE RECEIVER 9. Audio Mode Main Menu You can choose a mode among left, right or stereo using the BLUE(AUDIO) key. After installing your antenna system and STB with appropriate connectors. To change the audio mode: ● ● ● ● Press the BLUE(AUDIO) key to select the left, right or stereo. Press the EXIT key to save and escape from this menu. Plug in the AC main power and switch on the receiver. Press MENU key to bring up the main menu.
0419 MF68-00325A_Eng 4/19/04 5:11 PM Page 20 OPERATING THE RECEIVER 1.1 LNB Setting 1.2.1 User Mode You can select the satellite and LNB setting conditions to execute channel search and you can alter the settings for 22KHz tone. The parameters set in this menu are needed for programming the channels for the “Auto scanning” and “Manual scanning”. The necessary information can be found at your antenna and LNB brochures, or you can ask your dealer. ● ● ● ● ● ● ● Select LNB power supply “On”.
0419 MF68-00325A_Eng 4/19/04 5:11 PM Page 22 OPERATING THE RECEIVER 1.3 Auto Scanning ● The sub menu “Auto Scanning” will enable download the channels automatically from the preprogrammed satellites. Note : Especially on New transponder at Load TR, this new transponder can be added into transponder list so that you can use it on Auto Scanning later, only if at least one channel is found with this new transponder. In order to save it, press OK key.
0419 MF68-00325A_Eng 4/19/04 5:11 PM Page 24 OPERATING THE RECEIVER 1.5 SMATV Scanning 2. Channel Organising In case that several generations use Antenna and LNB in common, search the service the from 950 to 2150MHz. The “Channel Organising” menu has seven functions: This menu is for removing some channels from channel list which are related with designated Satellite or Transponder. And it provides making favorite list and moving channel position as you want.
0419 MF68-00325A_Eng 4/19/04 5:11 PM Page 26 OPERATING THE RECEIVER 2.4 Delete All Channels 2.7 Move & Edit Channel At the request window, press OK key to delete all channels and press EXIT to exit. ● ● ● ● ● 2.5 Delete Scrambled Channels At the request window, press OK key to delete scrambled channels and press EXIT to exit. To edit Channel Name ● ● ● ● ● 2.6 Favorite Channels You can immediately register the present channel to the desired Favorite Group.
0419 MF68-00325A_Eng 4/19/04 5:11 PM Page 28 OPERATING THE RECEIVER 3. Parental Lock 3.2 Change PIN Code This “Parental Lock” feature sets viewing restrictions and prevents unauthorized access to your STB through the PIN (Personal Identification Number), which is a 4 digit number. (The factory preset PIN Code : 0000) To change the PIN Code, select the second option “Change PIN Code”.
0419 MF68-00325A_Eng 4/19/04 5:11 PM Page 30 OPERATING THE RECEIVER 4.2 OSD Setting To set User defined mode or EPG color mode You can set the OSD transparency, the display time, Color Scheme and OSD Position. ● ● ● Select OSD Transparency level. The OSD Transparency level from 0 to 100%. Setting is made with the numeric keys, / keys or PG+/PG- keys. ● ● Press the GREEN(TEXT) key. The item which you want to change will appear. Move the item which you want to change using the / keys.
0419 MF68-00325A_Eng 4/19/04 5:11 PM Page 32 OPERATING THE RECEIVER 4.4 Time & Timer Setting 4.5 System Information 1) Time If you have to contact your service provider or a service center they might ask for information available from this menu. Place the cursor on this sub menu and press the OK key. The following will be the on-screen display. ● ● Place the cursor on this sub menu and press OK. Press / keys to change local time in Time Zone.
0419 MF68-00325A_Eng 4/19/04 5:11 PM Page 34 TROUBLESHOOTING 4.7 Copy Channel Data If you want to copy the channel data from one receiver to another, please follow the instruction below. Please make your own channel data, such as favorite & lock channel with your own master box. Then take your master box when you install another box. 1. Plug on both master & slave receivers 2. Master Box(Installed Box) : Stand-by Mode 3. Slave Box(Installing Box) : Menu Mode 4.
0419 MF68-00325A_Eng 4/19/04 5:11 PM Page 36 A/V output Power supply Type : Input voltage : Fuse rating : RCA JACK : SMPS AC 120V~,60 Hz 250 V/T1.6AH RF modulator Modulator output : Video type : Output level : Output connector : Ant. O/P connector : Tuner Freq.
0419 MF68-00325A_Eng 4/19/04 5:11 PM Page 38 MEMO MEMO
0419 MF68-00325A_Eng 4/19/04 5:11 PM Page 40 MEMO