User's Manual

Ver.

Mobile WiMAX/TD-LTE Smart MBS, U-RAS Flexible V2 RRH-B4 Installation Manual

2600-00F1W8GAA

4.0

Assembling Heat Shrink Tube

Figure F.10 Assembling Heat Shrink Tube

2) Set the temperature of the heat gun to 356-392℉(180-200°C).

3) Locate a heat shrink tube to cover the entire copper tube of the pressure terminal.

4) Rotate a heat gun 360° to apply heat evenly to shrink the tube.

(Because the pressure terminal and the cable is hot due to the heat of a heating gun, be careful not to

have a burn.)

1) After assembling a pressure terminal, move the heat shrink tube, inserted to the cable, to the end of

pressure terminal copper tube.

Heat Shrink Tube

Pressure Terminal