User's Manual

Ver.

Mobile WiMAX/TD-LTE Smart MBS, U-RAS Flexible V2 RRH-B4 Installation Manual

2600-00F1W8GAA

4.0

C.8 How to Shrink the Heat Shrink Tube

C.8.1 When Assembling a Connector to the Feeder Line

Below is the procedure for shrinking the heat shrink tube.

Figure C.15 Shrinking the Heat Shrink Tube_Feeder Line (1)

1) Prepare a 1/2 in. feeder line, heat shrink tube, and

heating gun to finish the cable using a heat shrink

tube.

2) Insert the heat shrink tube into the 1/2 in. feeder

line, and then place the heat shrink tube at the end

of the cutting area of the connector where the tool

will be used.

3) Set the heating gun to 482 to 572°F (250 to 300°C).

Heat Shrink Tube (Jelly Type)

28/6 × 5.9 in. (150 mm)

1/2 in. Connector

Heating Gun

1/2 in. Feeder Line

Cutting Area