User's Manual

Ver.
ANNEX A. Sector Antenna Installation
A-2 © SAMSUNG Electronics Co., Ltd.
2600-00F1W8GAA
4.0
A.3 Sector Antenna Installation
The method of sector antenna installation is as follows.
1) Put up an antenna pole and insert the sector antenna into the antenna pole using a
fixing clamp.
2) Set the antenna’s up/down tilt to 0° and fix the fixing clamps at the top and bottom.
3) Adjust the tilted angle of the antenna by taking the signal strength into account.
The bolts on the upper and lower guide clamps must be loose as to allow angle
adjustment of the antenna.
4) After adjusting the antenna angle, tighten up the 4 loose bolts on the upper and lower
guide clamps.