User's Manual

Ver.
Mobile WiMAX/TD-LTE Smart MBS, U-RAS Flexible V2 RRH-B4 Installation Manual
© SAMSUNG Electronics Co., Ltd. 3-75
2600-00F1W8GAA
4.0
Figure 3.54 RF Cable Configuration
RF Antenna Connector
As different connector types may be used depending on the RF antenna type,
check the antenna connector before connecting the cable.
RF Cable Identification Tag Installation
Attach the identification tape in the below table to the RF cable.
Table 3.19 RF Cable Identification Tag
Category
Description
Installation position
Attach the identification tag to the both ends of the antenna.
Materials
Use the material of aluminum coated by vinyl for the identification tag.
Fixing method
- Antenna side: Attach the tag to the feeder line using binding strings
through the two holes on the tag.
- Equipment Side: Cover up the feeder line with the tag and fix it using
binding strings through the two holes on the tag.
Identification method
The markings must be prevented from being erased by using relief
engraving or coated labels.
RF Antenna
[RRH-B4]
1/2 in. Feeder Line
(RRH-B4~RF Antenna)