User's Manual

Using USB memory device

2. Menu overview and basic setup

Customizing Scan to USB

You can specify image size, file format, or color mode for each

scanning to USB job.

Select (scan) > (Menu) > Scan Feature > USB Feature

on the control panel.

Select the setting option you want appears.

• Scan Size: Sets the image size.

• Original Type: Sets the original document’s type.

• Resolution: Sets the image resolution.

• Color Mode: Sets the color mode. If you select Mono in

this option, you cannot select JPEG in File Format.

• File Format: Sets the file format in which the image is to be

saved. When you select TIFF or PDF, you can select to scan

multiple pages. If you select JPEG in this option, you

cannot select Mono in Color

Mode.

• Duplex: Sets the duplex mode.

• Darkness: Sets the brightness level to scan an original.

• Contrast: Sets the contrast level to scan an original.

Select the desired status you want and press OK.

Repeat steps 2 and 3 to set other setting options.

Press (Stop/Clear) to return to ready mode.

You can change the default scan settings.

Refer to the Advanced

Guide.



Printing from a USB memory device

You can directly print files stored on a USB memory device. You can

print TIFF, BMP, JPEG and PRN files.

File types supported by Direct Print option.

• PRN: Only files created by provided driver with your machine are

compatible.

• PRN files can be created by selecting the Print to file check box

when you print a document. The document will be saved as a

PRN file, rather than printed on paper. Only PRN files created in

this fashion can be printed directly from USB memory.

Refer to the

Advanced Guide to learn how to create a PRN file.

• BMP: BMP Uncompressed

• TIFF: TIFF 6.0 Baseline

•JPEG: JPEG Baseline