User's Manual
Media and tray
47
2. Menu overview and basic setup
• The settings set from the machine driver override the
settings on the control panel.
a To print from an application, open an application and
start the print menu.
b Open Printing Preferences (see "Opening printing
preferences" on page 52).
c Press the Paper tabGand select an appropriate paper
type.
• If you want to use special-sized paper such as billing
paper, select the Paper tab > Size > Edit... and set
Custom
G
Paper Size Settings in the Printing Preferences
(see "Opening printing preferences" on page 52).
7
Preparing originals type
• Do not load paper smaller than 142 x 148 mm (5.6 x 5.8 inches) or
larger than 216 x 356 mm (8.5 x 14 inches).
• Do not attempt to load the following types of paper, in order to
prevent paper jam, low print quality and machine damage.
- Carbon-paper or carbon-backed paper
- Coated paper
- Onion skin or thin paper
- Wrinkled or creased paper
- Curled or rolled paper
- Torn paper
• Remove all staples and paper clips before loading.
• Make sure any glue, ink, or correction fluid on the paper is
completely dry before loading.
• Do not load originals that include different sizes or weights of
paper.
• Do not load booklets, pamphlets, transparencies, or documents
with other unusual characteristics.