User's Manual

Management tools_51
Setting network values
1. Print the machine’s network configuration report to find your
machine’s MAC address.
2. From the Windows Start menu, select All Programs > Samsung
Printers > SetIP > SetIP.
3. Click to open the TCP/IP configuration window.
4. Enter the network card’s MAC address, IP address, subnet mask,
default gateway, and then click Apply.
When you enter the MAC address, enter it without a colon(:).
5. The machine prints the network information. Confirm all the settings
are correct.
6. Close the SetIP program.
Macintosh
SetIP program should be automatically installed during the printer driver
installation.
Printing out the machine’s MAC address
In ready mode, press and hold the (cancel button) for about 5
seconds. You can find your machine’s MAC address and IP address.
Setting network values
If you want to change your network printer IP setting, follow the below
instruction.
If you select Typical installation for a network printer during the
printer driver installation, the SetIP program automatically runs
after the installation. Go to step 4.
1. Print the machine’s network configuration report to find your
machine’s MAC address.
2. Open the Library folder > Printers > Samsung > your printer
model name > SetIP.
3. Double click the SetIPApplet.html file.
4. The certificate window appears, click Trust.
5. Click to open the TCP/IP configuration window.
6. Enter the network card’s MAC address, IP address, subnet mask,
default gateway, and then click Apply.
When you enter the MAC address, enter it without a colon(:).
7. The machine prints the network information. Confirm all the settings
are correct.
8. Close the SetIP program.
Linux
SetIP program should be automatically installed during the printer driver
installation.
Printing out the machine’s MAC address
In ready mode, press and hold the (cancel button) for about 5
seconds. You can find your machine’s MAC address and IP address.
Setting network values
1. Print the machine’s network configuration report to find your
machine’s MAC address.
2. Open the /opt/Samsung/mfp/share/utils/.
3. Double click the SetIPApplet.html file.
4. Click to open the TCP/IP configuration window.
5. Enter the network card’s MAC address, IP address, subnet mask,
default gateway, and then click Apply.
When you enter the MAC address, enter it without a colon(:).
6. The machine prints the network information. Confirm all the settings
are correct.
7. Close the SetIP program.
USING THE UNIFIED LINUX DRIVER
CONFIGURATOR
The supplied software CD provides you with the Unified Linux Driver
package for using your machine with a Linux computer.
Unified Linux Driver Configurator is a tool primarily intended for configuring
machine devices.
After the driver is installed on your Linux system, the Unified Linux Driver
Configurator icon will automatically be created on your desktop.
Opening the Unified Driver Configurator
1. Double-click the Unified Driver Configurator on the desktop.
You can also click the Startup Menu icon and select Samsung Unified
Driver > Unified Driver Configurator.
2. Click each button on the left to switch to the corresponding configuration
window.
To use the on screen help, click Help.
3. After changing the configurations, click Exit to close the Unified Driver
Configurator.
Printers configuration
Printers configuration has the two tabs: Printers and Classes.
1 Printers
Configuration
2 Ports
Configuration