User's Manual

5.3
PRINTING TASKS
Printing a Document
Make sure the Paper Source is set to Tray 1. If you use
paper in the Multi-Purpose Tray or optional Tray 2, select the
corresponding paper source.
Manual Feed source is used when printing to special
media. You have to feed one sheet at a time into the printer.
See page 4.10.
If the paper source is set to Auto Select, the printer
automatically selects the print media according to the
following order: Multi-Purpose Tray, Tray 1, Tray 2 (option).
Make sure the Paper Type is set to Plain Paper. If you
load a different type of print media, select the corresponding
paper type. For further information on print media, refer to
chapter 4 ‘Print Media’.
Also, select the paper size you have loaded in your printer.
The Paper Orientation option allows you to select the
direction in which information is printed on a page. Portrait
prints across the width of the page, letter style. Landscape
prints across the length of the page, spreadsheet style.
You can also see the printable area.
➐➐
➐➐
Landscape
➐➐
➐➐
Portrait
printable
area