User's Manual

44
Hold the memory DIMM so that the
notch and the connection point
are aligned with the slot as shown, and
insert the DIMM all the way into the
upper slot labeled DRAM MODULE at
a 90(Straight) degrees angle.
Memory and PostScript DIMMs
1
2
1 2
55
Hold the PS DIMM so that the notch
and the connection point are aligned
with the slot as shown, and insert the
DIMM all the way into the lower slot
labeled FLASH-ROM MODULE at a
90(Straight) degrees angle.
1
2
1
2
66
Reconnect the power cord and turn the
printer on.
Note: For PostScript driver installation and usage information on a Macintosh system, refer
to Appendix C, “Using Your Printer with a Macintosh.” For PS printing on a Windows
system, refer to Appendix E, “Using Windows PostScript Driver.”
H.3
PRINTER OPTIONS