User's Manual

System Setup
193
3. Useful Setting Menus
Auto Continue
Determine whether or not the machine continues
printing when it detects the paper does not match the
paper settings.
• Off: If a paper mismatch occurs, the machine waits
until you insert the correct paper.
• On: If a paper mismatch occurs, an error message
will display. The machine waits for about 30 second,
then automatically clear the message and continue
printing.
Auto CR
Allows you to append the required carriage return to
each line feed, which is useful for Unix or DOS users.
Auto Tray Swi.
Determine whether or not the machine continues
printing when it detects the paper does not match. For
example, if both tray 1 and tray 2 are filled with the
same size paper, the machine automatically prints from
tray 2 after the tray 1 runs out of paper.
This option does not appear if you selected
Auto for Paper Source from printer driver.
Paper Substit
U
Automatically substitutes the printer driver’s paper size
to prevent the paper mismatch between Letter and A4.
For example, if you have A4 paper in the tray but you
set the paper size to Letter in the printer driver, the
machine prints on A4 paper and vice versa.
Item Description
Tray Protect
Decides to use or not use the Auto Tray Swi. feature. If
you set tray 1 to on, for example, then tray 1 is excluded
during tray switching.
Print BlankPage
The printer detects the printing data from computer
whether a page is empty or not. You can set to print or
skip the blank page.
Maintenance
• CLR Empty Msg.: This option appears only when
toner cartridge is empty.
• Supplies Life: Allows you to check how many pages
are printed and how much toner is left in the
cartridge.
• TonerLow Alert: If toner in the cartridge has run
out, a message informing the user to change the
toner cartridge appears. You can set the option for
this message to appear or not.
Item Description