Owner's Manual
Table Of Contents
- Owners Manual
- Bluetooth PIN (0000)
- Table of Contents
- Introduction
- Features
- Parts & Controls
- Quick Start
- Pairing with a Bluetooth Device
- Charging the Battery
- Speaker Placement
- Avoiding Feedback
- Quick Start - Stage XPD1 Wireless System
- HXD1 Handheld Transmitter Controls
- RXD1 Receiver Controls
- Using the Line Out Jack
- Making Connections
- Specs
- Brochure
- Warranty
Control
Panel
Features
1 .
2.
3.
4.
5.
6.
7.
8.
9.
MICIINST
Input
-
Use
this
XLR/
1
/4
11
input for microphone,
instrument with
and
active
preamp
or
a line signal.
LEVEL
(CHANNEL
1)
-
Used
to
control the
level
of the
CHAN-
NEL
1 Mic/Line input.
AUX
IN
- Connect a I i
ne
level
device using a 3.5mm audio
cable.
LINE
Input-
~~~
input
used
to
connect instrument
or
line
level
signals.
LEVEL
(CHANNEL
2)
-
Used
to
control the
level
of the M
P3
IN
and
LINE inputs.
2.4GHz
WIRELESS
Input*
-
Con-
nect the
Samson
Stage
XPD
1
digital wireless
USB
receiver
to this input.
The
wireless receiver gets its
power
from the XP106,
so
no
additional
power
supply
is
needed.
LEVEL
(WIRELESS)-
Used
to control the
level
of the 2.4GHz
WIRELESS
in
put.
LINE
OUT-~~~
output connector
to
link multiple XP106
systems
together
LEVEL
(BLUETOOTH®)-
Used
to control the
level
of the 8/uetooth input.
10.
SPEECH/MUSIC
Switch- This switch
is
used
to
change
the overall fre-
quency
response,
or
tone contour, for the XP106
sound
system. If
your
application
is
mainly for music,
leave
the switch
up
to select the
MUSIC
response
curve.
If
your
application
is
mainly for
spoken
word,
press
the
switch
down
to select the
SPEECH
response
curve.
11.
Power-
Switches
on
the
main
power.
12.
PEAK
LED-
The
Red
LED
illuminates at the
level
where
distortion occurs.
13.
Battery
Indicator-
Displays the status of the battery
charge
level.
14.
DC
IN-
Connect the supplied
power
adapter
here.
*
The
USB connector is for the Stage XPDl receiver only.
The
connector is
not
designed to charge smartphones, tablets,
or
similar
devices.
XP
1
06
•
Portable
PA
System
9