Owner's Manual

1. Antenna - The antenna mountings allow full rotation for optimum placement. In normal

operation, both antennas should be placed in a vertical position. The antennas can be

folded down for convenience when transporting the SR412.

2. POWER DC IN - Connect the supplied 15-volt adapter here.

WARNING: Do not substitute any other kind of power adapter. Doing so can cause damage

to the SR412 and will void your warranty.

3. Unbalanced Outputs - Use the unbalanced, 1/4” jacks to connect the individual SR412

receivers to the line level inputs of a mixer, amplifier, or other audio equipment.

4. CHANNELS A & B Mixed Output -

This balanced, low impedance XLR jack carries a mix of

both the Channel A and Channel B receivers.

5. CHANNELS C & D Mixed Output - This balanced, low impedance XLR jack carries a mix of

both the Channel C and Channel D receivers.

6. MIXED OUT ALL CHANNELS - This balanced, low impedance XLR jack carries a mix of all four

receivers.

3 33 3

2 5 6

SR412 Receiver Rear Panel Features