Specifications
SPS-500 Program Manual v1.26 P Mode Programming 87
3. Once PLUs are added they will be displayed as a list on the screen:
Each Column of PLU data is described in the table below:
Column Explanation
GROUP Touch a GROUP in the group selection box to display the PLUs that are linked to the
group. Use the arrow up (↑) or arrow down (↓) keys at the bottom of the box to view
Groups 1-16 or 17-30.
PLU# This is field display only and cannot be edited. Use the check box to the left of the PLU
number to select the PLU for editing. PLUs assigned to group 1 will begin with PLU
#1001 and range to PLU #1999; PLUs assigned to group 2 will range from 2001-2999,
etc.
DESCRIPTOR Touch the current descriptor button to edit the descriptor field.
STOCK
Select a PLU and touch STOCK to set the stock level for the PLU.
STOCK
KP
Touch STS GRP and/or STOCK buttons to toggle from NO to YES. The YES/NO
status determines the status group to which the PLU is assigned:
PLUs with option NO STOCK and NO KP are linked to PLU STATUS
GROUP #1.
PLUs with option STOCK and NO KP are linked to PLU STATUS GROUP
#2.
PLUs with option NO STOCK and KP are linked to PLU STATUS GROUP
#3.
PLUs with option STOCK and KP are linked to PLU STATUS GROUP #4.
PRICE Touch the current price button to edit the price field.
Group List
Box
PLU Selection
Check Box