Specifications

28  Software Installation & SD Utilities SPS-500 Program Manual v1.26
Diagnostics/Functions Available form the System Menu
Display/Touch
LCD Touch the screen to sequence through display test
patterns.
LCD Brightness Display dims, and then brightens.
Touch Indicates position activated when the screen is touched.
Rear Display Initiates rear display test pattern. Touch any key or
screen to exit.
Rear LCD On/Off Flashes rear display backlight on/off. Touch any key or
screen to exit.
LED On/Off Flashes IRC LED. Touch any key or screen to exit.
SRAM
Choose YES to test SRAM. Test clears memory.
Loopback
Loop back connection required to complete test.
Etc
Displays test results for Nand Flash, SD card, MSR
track 1-3, MICOM version, displays cash drawer and
printer status.
RTC
Read Display current YYYY/MM/DD, time and day-of-week.
Write Set YYYY/MM/DD, time and day-of-week.
Keyboard
Display keyboard facsimile; indicates positions pressed.
Press lower-right key three times to end test.
Printer
Printer Test Prints test receipt. Current receipt count displays on rear
display
Cutter Feeds, and then cuts paper. Touch any key or screen to
exit. Current cutter count displays on rear display.
Pattern Test Prints pattern test receipt.
Reset Printer Count Touch to reset printer count.
Reset Cutter Count Touch to reset cutter count.
SD
Insert SD card. Card is tested.
Check SMC Bad
Performs NAND bad block test.
Aging
Aging w/printer Starts continuous display/memory/printer test. Touch