Specifications

Sam4s SPS500 Programming Manual - 19 -

Message Explanation

Device Open Error The device is unable to open due to an error.

Password Error The Password entered is incorrect.

Nothing Selected No selection had been made.

Invalid SD Card The SD card being used is the wrong format or is not working correctly.

Reset Report? This is shown after a report with an option of Yes or No clearing prompt.

Choose IRC Reporting IRC reporting has to be selected for the desired report to be printed

Please Check Sd Card The SD card may be full or not inserted correctly

MCR Required Magnetic card reader required.

File Not Found The requested file has not been found.

Out of Stock The item is set to only allow a sale if stock present, and there is no stock.

Under Minimum Stock The item is below the preset minimum stock value set in the register.

Delivery not Opened

The delivery selected, is not in an open status, use the delivery key to open

the customer details.

Please Check USB The USB did not read, power off/on the register to recognise the device.

Invalid USB The USB is recognised but deemed invalid

Print Check First The Print Check bill must be produced before continuing

Cover Open Close the printer cover

Paper Near End Paper Roll is running low

TPH Temperature is High The printer thermal head is too hot, allow the printer to cool

Auto Cutter Jam The printer is jammed

Printer Buffer Full The printer can not receive any further data, check transmission

Mode Change Error Turn the mode switch back to the original position

Restore Dallas Key The signed on employee has removed the Dallas key, replace key on lock

Modification not allowed Condiment or PLU item adjustments are not allowed as the order has printed.