Specifications

Sam4s SPS500 Programming Manual - 129 -
Service Management
The Service Management menu can be used for the following setup procedures.
Setup
- The Service Menu is accessed by powering Off/On the register, whilst pressing Cash then
pressing the Top Left, Bottom Left, Top Right, Bottom Right keys.
- The password 1287 ENTER is required, to access the main menu.
Write Mac Address
This is the fundamental address code, and should not be adjusted without
first consulting a technician.
MCR
The register can be fitted with an optional MCR reader for clerk sign on.
The cards are normally configured using track 2, as per this option
Logo Define
This allows the Logo images to be loaded into the register as outlined the in
System Options – General Print Options section of the manual.
Printer Density
The depth of shading for print outs can be adjusted using this option
Select Keyboard
The stroke and flat keyboard types are interchangeable and the appropriate
type can be selected using this option. The terminal will recognise change
when memory all cleared alternative use this option to activate a keyboard
change.
Power Output
This option allows the power to the serial ports to be adjusted as required.