Specifications

SER-7000 Program Manual P-Mode Programming
x
185
Custom Report
One custom report can be created, with up to 50 totals and counters. The report is built by
selecting totals that also appear on either the financial or sales by time period reports. When
the custom report is created, totals and counters separate from the original report are also
created (in other words, you can clear the custom reports independently without affecting
totals in any other report.)
Another feature of the custom report is the ability to add or subtract selected totals to create a
new subtotal of selected information.
CUSTOM REPORT PROGRAMMING
RPT TTL
#
# # RED +/- DESCRIPTOR
01 0 000 N NON
02 0 000 N NON
03 0 000 N NON

ESC Y/N ENTER PAGE UP/DN npom
1. Select CUSTOM
REPORT from the
REPORT
PROGRAMMING
MENU to display the
CUSTOM REPORT
PROGRAMMING
screen.
2. Refer to "Custom
Report Program
Notes" on the
following page to fill
the fields for each
line of the report.
3. Press ESC to exit the
CUSTOM REPORT
PROGRAMMING
screen.
Use the total #998 to create a dashed separator line on the report.
Use the total #999 to create a subtotal line. The subtotal line will calculate the totals
designated "+" or "-" that appear sequentially after the previous subtotal line. Enter
a custom descriptor for the subtotal line.